datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P-1634BG09 View Datasheet(PDF) - HIROSE ELECTRIC

Part Name
Description
View to exact match
P-1634BG09 Datasheet PDF : 31 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Assembling Procedure
Male contact
Pin contact housing
Low-numbered side
Wire
about 3.5mm
Low-numbered side
Female contact
Crimped state
After assembling, pull
the wire slightly and
make sure if the con-
tact is mounted as
Socket contact housing shown above.
Procedure for Contact Extraction
In case of extracting a contact from the housing due to
insertion error or circuit change, follow the steps as shown below.
Fig. 1
Extraction
Fig. 2
Shell
1 Hold the Contact Extractor as shown in Fig. 1, plac-
ing the tip of the Extractor on the tip of a contact,
then insert it between the contact and the housing.
2. When the tip of the Extractor comes into contact
with a stepped part in the housing, the spring will
come off from the stepped part with a snap which
can be felt. Then, extract the contact by pulling the
wire.
0. (Caution: Pushing the tip of the extractor forcibly
before the spring has come off from the stepped
part may damage the contact).
3. Above Fig. 1 and Fig. 2 show how to extract a con-
tact from socket housing. The same procedure
can be employed to extract a contact from pin
housing.
116
04/2009
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]