DSOX3SGM View Datasheet(PDF) - Agilent Technologies, Inc
Part Name
Description
View to exact match
DSOX3SGM Datasheet PDF : 20 Pages
| |||
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characterisitics
Acquisition modes
Normal
Peak detect
Averaging
High resolution mode
Segmented
Trigger system
Trigger modes
Trigger coupling
Trigger source
Trigger sensitivity (internal)*
Trigger sensitivity (external)*
Capture glitch as narrow as 500 ps at all timebase settings.
Select from 2,4,8,16, 64... to 65,536
12 bits of resolution when ≥ 20 µs/div
Re-arm time= 19 µs (minimum time between trigger events)
• Edge (rising/falling alternate, either)–Conventional level-driven trigger.
• Pulse width (or glitch)–Trigger on a pulse width less than, greater than, or
within a time range, with a selectable time limit ranging from 17 ns to 10 s.
• Pattern-trigger on a logical AND combination of the channels. Each
channel can have a value of zero, one, don’t care (X), or a rising or falling
edge (one channel only).
• Video–Trigger on all lines or individual lines, odd/even or all fields from
composite video or broadcast standards (NTSC, PAL, PAL-M, SECAM).
Coupling selections: AC, DC, noise reject, LF reject and HF reject.
Each analog channel, each digital channel (MSO models or DSOX2MSO
upgrade, Ext, WaveGen, line)
< 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
200 mV (DC to 100 MHz); 350 mV (100 MHz - 200 MHz)
Cursors
Types
Measurements
Amplitude, time , frequency (FFT), manual, tracking, binary, HEX
∆T, 1/∆T, ∆V/X, 1/∆X, ∆Y
Automatic waveform measurements
Voltage
Snapshot all, maximum, minimum, peak-to-peak, top, base, amplitude, overshoot, preshoot, average- N
cycles, average-full screen, DC RMS- N cycles, DC RMS- full screen, AC RMS- N cycles
Time
Period, frequency, rise time, fall time, + width, – width, duty cycle, delay A→B (rising edge), delay A→B
(falling edge), phase A→B (rising edge,) and phase A→B (falling edge)
Cursors**
• Single cursor accuracy:
+[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
• Dual cursor accuracy:
+[DC vertical gain accuracy + 0.5% full scale]*
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and from ±10 °C firmware calibration temperature.
** 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 2 mV/div sensitivity setting.
16
|
|
Share Link: 