HC2E-H-DC12V-VDE View Datasheet(PDF) - Panasonic Corporation
Part Name
Description
View to exact match
HC2E-H-DC12V-VDE Datasheet PDF : 18 Pages
| |||
HC
UL/C-UL (Recognized)
Item
File No.
Contact rating
1 Form C
E43028
10A 250V AC
1/3HP 125, 250V AC
3A 30V DC
2 Form C
HC with
diode type
(For DC)
3 Form C
E43028
E43028
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
4 Form C
E43028
5A 250V AC
1/10HP 125, 250V AC
3A 30V DC
4 Form C twin E43149
3A 250V AC
3A 30V DC
1 Form C
E43028
10A 250V AC
1/3HP 125, 250V AC
3A 30V DC
2 Form C
E43028
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
HC with
CR circuit 3 Form C
E43028
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
4 Form C
E43028
5A 250V AC
1/10HP 125, 250V AC
3A 30V DC
4 Form C twin E43149
3A 250V AC
3A 30V DC
CSA (Certified)
File No.
Contact rating
LR26550
etc.
10A 250V AC
1/3HP 125, 250V AC
3A 30V DC
LR26550
etc.
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
LR26550
etc.
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
LR26550
etc.
5A 250V AC
1/10HP 125, 250V AC
3A 30V DC
LR26550 3A 250V AC
etc.
3A 30V DC
LR26550
etc.
10A 250V AC
1/3HP 125, 250V AC
3A 30V DC
LR26550
etc.
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
LR26550
etc.
7A 250V AC
1/6HP 125, 250V AC
3A 30V DC
LR26550
etc.
5A 250V AC
1/10HP 125, 250V AC
3A 30V DC
LR26550 3A 250V AC
etc.
3A 30V DC
VDE (Certified)
File No.
Contact rating
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TV rating (UL/CSA)
File No.
Rating
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Remarks
NOTES
1. Amber sealed type
When mounting TM types, use washers
to prevent damage or distortion to the
polycarbonate cover. When tightening
fixing screws, the optimum torque range
should be 0.294 to 0.49 N·m, (3 to 5
kgf·cm). If screws are over tightened, the
cover may distort, resulting in poor
sealing. Moreover, to prevent loosening,
use washers.
2. Keep relay
1) The schematic differs from that in the
standard type 4 Form C HC relay. Follow
the schematic on the cover sticker.
2) Conform with the schematic for the DC
type, which has a polarized coil.
3) Because retention characteristics vary
according to the waveform of the voltage
applied to the coil, do your best to avoid
capacitor driving.
In capacitor driving, use a capacitor of
300 µF or more.
4) Ensure that the minimum pulse width
of voltage applied to coil is greater than
150 ms.
3. Diode characteristics
1) Reverse breakdown voltage: 1,000 V
2) Forward current: 1 A
4. Diode and CR built-in type
Since the diode and CR inside the relay
coil are designed to absorb the counter
emf, the element may be damaged if a
large surge, etc., is applied to the diode
and CR.
If there is the possibility of a large surge
voltage from the outside, please
implement measures to absorb it.
5. Please connect DC coil types with
LED and built-in diode correctly by
verifying the coil polarity (“+” and “–
”). Connecting with reverse polarity
will cause the LED not to light and
damage the built-in diode due to its
specification.
For Cautions for Use.
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASCTB4E 201201-T
|
|
Share Link: 