M62436FP View Datasheet(PDF) - Renesas Electronics
Part Name
Description
View to exact match
M62436FP
Renesas Electronics
M62436FP Datasheet PDF : 12 Pages
| |||
M62436FP
14 External 15
RADD
2.4k 390p
Focus gain setting external resistor
The Focus gain can be reduced by connecting resistors between pins 14 and 15 and between pins 25 and 26. This has
the effect of improving the maximum input voltage (and the output noise voltage) characteristics. However, there is a
limitation on the maximum input voltage (Vl = 0.6 Vrms) due to the SRS sound block gain at f = 150 Hz.
Reference
Note: Ta = 25°C, f = 1 kHz, R13 = R16 = 390, R14 = R17 = 200, R15 = R18 = 390, resistance between pins 14 and
15 and between pins 25 and 26 = 10 kΩ unless otherwise noted.)
Item
Symbol Typical Value Unit Test Conditions
Maximum output voltage
Maximum input voltage
VOMt 1.9
VIM1
0.65
Vrms
Vrms
Pins 2 and 35 input, pins 16 and 22 output
RL = 10 kΩ, THD = 1%
Pins 2 and 35 input, pins 16
f = 150HMz
and 22 output
SRS: on, Focus: off, THD = 1%
VIM2
0.85
VIM3
0.67
Vrms
Vrms
Pins 2 and 35 input, pins 16
and 22 output
SRS: on
Focus: Position “H” on
THD = 1%
f = 1kHMz
f = 20kHMz
Pass-through gain
Gvt
0
dB
Vi = 100 mVrms, SRS: off, Focus: off
Gain between pins 2 and 35 and pins 16 and
22
Gv1
10
dB
Vi = 100 mVrms
f = 150HMz
Pins 2 and 35 input, pins 16
and 22 output
SRS: on, Focus: off
Gv2
7
Gv3
9
dB
Vi = 100 mVrms
f = 1kHMz
dB
SRS: on
Focus: Position “H” on
f = 20kHMz
Gain between pins 2 and 35
and pins 16 and 22
Output noise voltage
VNO1 5
µVrms Rg = 0 (pins 2 and 35), SRS: off, Focus: off
DIN-audio filter
VNO2 18
µVrms Rg = 0 (pins 2 and 35), SRS: on, Focus: off
DIN-audio filter
VNO3 30
µVrms Rg = 0 (pins 2 and 35)
SRS: on, Focus: Position “H” on
DIN-audio filter
Crosstalk between channels CT
−90
dB
Input side: f = 1 kHz, Vi = 0.5 Vrms
Measurement side: Rg = 0, JIS-A filter
Focus and SRS: off, RL = 10 kΩ
Rev.1.0, Sep.19.2003, page 6 of 11
|
|
Share Link: