|LM1086CS-ADJ/NOPB||1.5-A Low Dropout Positive Regulators|
|LM1086CS-ADJ/NOPB Datasheet PDF : 30 Pages |
SNVS039J – JUNE 2000 – REVISED APRIL 2015
LM1086 1.5-A Low Dropout Positive Regulators
•1 Available in 1.8-V, 2.5-V, 3.3-V, 5-V and
• Current Limiting and Thermal Protection
• Output Current 1.5 A
• Line Regulation 0.015% (Typical)
• Load Regulation 0.1% (Typical)
• High-Efficiency Linear Regulators
• Battery Chargers
• Post Regulation for Switching Supplies
• Constant Current Regulators
• Microprocessor Supplies
The LM1086 is a regulator with a maximum dropout
of 1.5 V at 1.5 A of load current. The device has the
same pin-out as TI's industry standard LM317.
Two resistors are required to set the output voltage of
the adjustable output voltage version of the LM1086.
Fixed output voltage versions integrate the adjust
The LM1086 circuit includes a zener trimmed
bandgap reference, current limiting, and thermal
Refer to LM1084 for the 5-A version, and the LM1085
for the 3-A version.
PART NUMBER PACKAGE
BODY SIZE (NOM)
4 mm × 4 mm
DDPAK/TO-263 (3) 10.18 mm × 8.41 mm
14.986 mm × 10.16 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|Direct download click here|
|Share Link :|