datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

E-153 View Datasheet(PDF) - SEMITEC Corporation

Part Name
Description
View to exact match
E-153 Datasheet PDF : 44 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
ZENAMIC
Reliability
Characteristics
Standard Test Condition
Varistor Voltage
Maximum Allowable Voltage
Clamping Voltage
Electrical
Rated Power
Maximum Energy
Maximum
Peak Current
(Withstanding
Surge Current)
2 times
1 times
Temperature Coefficient of
Varistor Voltage
Capacitance
Withstanding Voltage
(Body lnsulation)
lmpulse Life
Test Methods/Descriptions
Unless other wise specified, electrical measurements (initial/aftertests) shall
be conducted at temperature of 5 to 35ЊC,relative humidity of 45 to 85%
and atmospheric pressure of 860 to 1060 hPa.
The voltage between two terminals with the specified measuring current CmA
DC applied is called Vc or VcmA. The measurement shall be made as fast as
possible to avoid heat affection.
The maximum sinusoidal RMS voltage or maximum DC voltage that can be
applied continuously in the specified operating temperature range.
The maximum voltage
between two terminals
100
90
with the specified
standard impulse current
(8/20s) illustrated
50
below applied.
10
0
8ms
20ms
Tim e
The power that can be applied in the specified ambient temperature.
The maximum energy within the varistor voltage change of Ϯ10% when a
single impulse current of 2 ms or 10/ 1000s is applied.
The maximum current within the varistor voltage change of Ϯ10% when a
standard impulse current of 8 / 20s is applied two times with an interval of
5 minutes.
The maximum current within the varistor voltage change of Ϯ10% with a
single standard impulse current of 8 / 20s is applied .
VcmA at 85ЊCϪVcmA at 25ЊC
VcmA at 25ЊC
ϫ
1
60
ϫ100(%/ ЊC)
Capacitance shall be measured at 1kHz Ϯ10%,1Vrms max.(1MHzϮ10%
below 100pF),0 V bias and 20Ϯ2ЊC
The specified voltage shall be applied between both terminals of the
specimen connected together and metal foil closely wrapped round its body
for 1 minute.
Classification(Nominal varistor voltage)
V0.1mA . V1mA ϽϪϪ330V
V0.1mA . V1mA Ͼ330V
Test voltage(AC)
1000 Vrms
1500 Vrms
The change of VcmA shall be measured after the impulse current listed
below is applied 10000 or 100000 times continuously at intervals of 10
seconds at room temperature.
Part NO.
ltem
Cycles
Current
lmpulse Life( )
lmpulse Life( )
ϫ104 Times
ϫ105 Times
impulse current
(A)
Z 5D180 to Z 5D680
8( 8 / 20s)
5( 8 / 20s)
Z 7D180 to Z 7D680
25( 8 / 20s)
15( 8 / 20s)
Z10D180 to Z10D680
50( 8 / 20s)
35( 8 / 20s)
Z15D180 to Z15D680
90( 8 / 20s)
50( 8 / 20s)
Z21D180 to Z21D680
130( 8 / 20s)
65( 8 / 20s)
Z 5D820 to Z 5D471
40( 8 / 20s)
25( 8 / 20s)
Z 7D820 to Z 7D511
100( 8 / 20s)
60( 8 / 20s)
Z10D820 to Z10D102
150( 8 / 20s)
85( 8 / 20s)
Z15D820 to Z15D102
200( 8 / 20s)
110( 8 / 20s)
Z21D820 to Z21D102
250( 8 / 20s)
120( 8 / 20s)
Criterion
To meet the
specified value.
0 toϪ0.05% / ЊC max.
To meet the specified
value
No breakdown
VcmA / VcmA ϽϪϪϮ10%
38
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]