datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

K1300E70 View Datasheet(PDF) - Teccor Electronics

Part Name
Description
View to exact match
K1300E70
TECCOR
Teccor Electronics TECCOR
K1300E70 Datasheet PDF : 6 Pages
1 2 3 4 5 6
Electrical Specifications
Type
Part No.
IT(RMS) VDRM
On-State
RMS Current
TJ125°C
50/60Hz
Sine Wave
(7) (8)
Repetitive
Peak
Off-State
Voltage
TO-92
E Package
DO-15X
G Package
TO-202AB
F Package
DO-214AA
S Package
See “Package Dimensions” section for variations.
K1050E70
K1050G
K1050S
K1100E70
K1100G
K1100S
K1200E70
K1200G
K1200S
K1300E70
K1300G
K1300S
K1400E70
K1400G
K1400S
K1500E70
K1500G
K1500S
K2000E70
K2000G
K2000F1
K2000S
K2200E70
K2200G
K2200F1
K2200S
K2400E70
K2400G
K2400F1
K2400S
K2401F1
K2500E70
K2500G
K2500F1
K2500S
K3000F1
Amps
MAX
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0 (10)
1.0
1.0
Volts
MIN
±90
±90
±90
±90
±90
±90
±180
±180
±190
±190
±190
±190
VBO
Breakover Voltage
50/60Hz Sine Wave
(1)
IDRM
IBO
Repetitive Breakover
Peak
Current
Off-State 50/60Hz
Current Sine Wave
50/60Hz
Sine Wave
V=VDRM
Volts
MIN
MAX
95
113
104
118
110
125
120
138
130
146
140
170
190
215
205
230
220
250
220
250
240
280
270
330
µAmps
MAX
5
5
5
5
5
5
5
5
5
5
5
5
µAmps
MAX
10
10
10
10
10
10
10
10
10
10
10
10
General Notes
• All measurements are made at 60Hz with a resistive load at an
ambient temperature of +25°C unless otherwise specified.
• Storage temperature range (TS) is -65°C to +150°C.
• The case (TC) or lead (TL) temperature is measured as shown on
the dimensional outline drawings. See “Package Dimensions” sec-
tion of this catalog.
• Junction temperature range (TJ) is -40°C to +125°C.
• Lead solder temperature is a maximum of +230°C for 10 seconds
maximum; 1/16" (1.59mm) from case.
Electrical Specification Notes
(1) See Figure 9.6 for VBO change vs junction temperature.
(2) See Figure 9.7 for IBO vs junction temperature.
(3) See Figure 9.2 for IH vs case temperature.
(4) See Figure 9.14 for test circuit.
(5) See Figure 9.1 for more than one full cycle rating.
(6) RθJA for TO-202 Type 23 and Type 41 is 70°C/watt.
(7) TC 90°C for TO-92 Sidac and TC 105°C for TO-202 Sidacs.
TL 100°C for DO-15X and TL 90°C for DO-214AA.
(8) See Figure 9.15 for clarification of Sidac operation.
(9) For best Sidac operation, the load impedance should be near or
less than switching resistance.
(10) Teccor's new, improved series of sidacs is designed to ensure
goodcommutationathigherswitchingfrequenciesasrequiredinignitor
circuits for high intensity discharge (HID) lighting. A typical circuit
for a metal halide lamp ignitor is shown in the schematic, Figure
9.3. With proper component selection this circuit will produce three
pulses for ignition of Osram lamp types such as HQI-T70W, HQI-
T150W, and HQI-T250W which require a minimum of three pulses
at 4kV magnitude and >1µs duration each at a minimum repetition
rate of 3.3kHz.
SIDAC
9-2
Teccor Electronics
(972) 580-7777
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]