LC662104A View Datasheet(PDF) - SANYO -> Panasonic
Part Name
Description
View to exact match
LC662104A Datasheet PDF : 13 Pages
| |||
System Block Diagram
LC662104A, 662106A, 662108A
Differences between the LC663XX Series and the LC6621XX Series
LC6630X Series
Item
(Including the LC66599 evaluation chip)
LC6635XB Series
LC6621XX Series
System differences
• Hardware wait time (number of
cycles) when hold mode is cleared
65536 cycles
About 64 ms at 4 MHz (Tcyc = 1 µs)
16384 cycles
About 16 ms at 4 MHz (Tcyc = 1 µs)
16384 cycles
About 16 ms at 4 MHz (Tcyc = 1 µs)
• Value of timer 0 after a reset
(Including the value after hold mode Set to FF0.
is cleared)
Set to FFC.
Set to FFC.
None (Tools are handled with
• DTMF generator
external devices.)
None
Yes
• Inverter array
None (Tools are handled with
external devices.)
None
None
• SIO1
Yes
Yes
None
• Three-value inputs/comparator
inputs
Yes
Yes
None
• Three-state output from P31
and P32
None
None
Yes
• Using P0 to clear halt mode
In 4-bit groups
In 4-bit groups
Can be specified for each bit.
• External extended interrupts
None for INT3, INT4, and INT5.
(Tools are handled with external
devices.)
None for INT3, INT4, and INT5.
INT3, INT4, and INT5 can be used
with the internal functions.
• Other P53 functions
Shared with INT2
(Tools are handled with external
devices.)
Shared with INT2
Shared with INT2
Differences in main characteristics
• Operating power-supply voltage
and operating speed (cycle time)
• LC66304A/306A/308A
4.0 to 6.0 V/0.92 to 10 µs
• LC66E308/P308
4.5 to 5.5 V/0.92 to 10 µs
• 3.0 to 5.5 V/0.92 to 10 µs
• LC6635XA
2.2 to 5.5 V/3.92 to 10 µs
3.0 to 5.5 V/1.96 to 10 µs
3.0 to 5.5 V/0.95 to 10 µs
• Pull-up resistors
P0, P1, P4, and P5: about 3 to 10 kΩ P0, P1, P4, and P5: about 3 to 10 kΩ P0, P1, P4, and P5: about 100 kΩ
• Port voltage handling
• P2 to P6 and PC: 15V handling
• P0, P1, PD, PE: Normal voltage
handling
• P2 to P6 and PC: 15V handling
• P0, P1, PD, PE: Normal voltage
handling
P2 to P4, P51, and P53: 15V voltage
handling Others: normal voltage
handling
No. 5996-4/13
|
|
Share Link: 