點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
DM11A
Serial Data Interface
The serial-in data (DAI) will be clocked into 8 bit shift register synchronized on the rising edge
of the clock (DCK). The data ‘1’ represents the corresponding current output ‘ON’, while the data
‘0’ stands for ‘OFF’. The data will be transferred into the 8 bit latch register when the strobe signal
(LAT) is ‘H’ (level trigger); otherwise, the data will be held. The trigger timing of the serial-out data
(DAO) will be shifted out on synchronization to the rising edge of the clock. All outputs are turned
off while enable terminal (EN) is kept at high level. And they are active when EN shifts to low.
8-bit Constant Current LED Driver
Version:A.003
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
Page 11