datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TA-80960KA View Datasheet(PDF) - Intel

Part Name
Description
View to exact match
TA-80960KA Datasheet PDF : 43 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
80960KA
2.6. Absolute Maximum Ratings
Operating Temperature (PGA).............. 0°C to +85°C Case
(PQFP) ......... 0°C to +100°C Case
Storage Temperature ................................. –65°C to +150°C
Voltage on Any Pin................................. –0.5V to VCC +0.5V
Power Dissipation .......................................... 2.5W (25 MHz)
NOTICE: This is a production data sheet. The specifi-
cations are subject to change without notice.
*WARNING: Stressing the device beyond the “Absolute Maxi-
mum Ratings” may cause permanent damage. These are
stress ratings only. Operation beyond the “Operating Condi-
tions” is not recommended and extended exposure beyond the
“Operating Conditions” may affect device reliability.
2.7. DC Characteristics
PGA:
PQFP:
80960KA (16 MHz) TCASE = 0°C to +85°C, VCC = 5V ± 10%
80960KA (20 and 25 MHz) TCASE = 0°C to +85°C, VCC = 5V ± 5%
80960KA (16 MHz) TCASE = 0°C to +100°C, VCC = 5V ± 10%
80960KA (20 and 25 MHz) TCASE = 0°C to +100°C, VCC = 5V ± 5%
Table 5. DC Characteristics
Symbol
Parameter
Min
Max
Units
Notes
VIL
Input Low Voltage
VIH
Input High Voltage
VCL
CLK2 Input Low Voltage
VCH
CLK2 Input High Voltage
VOL
Output Low Voltage
VOH
Output High Voltage
ICC
Power Supply Current:
16 MHz
20 MHz
25 MHz
–0.3
2.0
–0.3
0.55 VCC
2.4
+0.8
VCC + 0.3
+0.8
VCC + 0.3
0.45
315
360
420
V
V
V
V
V (1,2)
V (3,4)
mA (5)
mA (5)
mA (5)
ILI
Input Leakage Current
±15
µA 0 VIN VCC
ILO
Output Leakage Current
±15
µA 0.45 VO VCC
CIN
Input Capacitance
10
pF fC = 1 MHz (6)
CO
Output Capacitance
12
pF fC = 1 MHz (6)
CCLK
Clock Capacitance
10
pF fC = 1 MHz (6)
NOTES:
1. For three-state outputs, this parameter is measured at:
Address/Data ............................................................................................................................................................................................. 4.0 mA
Controls ...................................................................................................................................................................................................... 5.0 mA
2. For open-drain outputs ................................................................................................................................................................................ 25 mA
3. This parameter is measured at:
Address/Data ........................................................................................................................................................................................... -1.0 mA
Controls .................................................................................................................................................................................................... -0.9 mA
ALE .......................................................................................................................................................................................................... -5.0 mA
4. Not measured on open-drain outputs.
5. Measured at worst case frequency, VCC and temperature, with device operating and outputs loaded to the test conditions in Figures 12 and 13.
Figure 7, Figure 8 and Figure 9 indicate typical values.
6. Input, output and clock capacitance are not tested.
15
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]