Freescale Semiconductor, Inc.
STATIC ELECTRICAL CHARACTERISTICS (continued)
Characteristics noted under conditions 4.75 V ≤ V2 ≤ 5.25 V, 5.5 V ≤ VSUP ≤ 18 V, and -40°C ≤ TA ≤ 125°C. Typical values noted
reflect the approximate parameter mean at TA = 25°C under nominal conditions unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
VSUP TERMINAL (continued)
Supply Current in Stop Mode (Note 14) [IOUT at VDD < 2.0 mA, VDD ON,
ISUP(STOP-WE)
µA
VSUP < 13.5 V, Oscillator Not Running (Note 15), CAN in Sleep Mode with
Wake-Up Enabled]
TA = -40°C
–
100
–
TA = 25°C
TA = 125°C
–
92
–
–
80
–
BATFAIL Flag Internal Threshold
VBF
1.5
3.0
4.0
V
BATFAIL Flag Hysteresis (Note 16)
VBF(HYS)
–
1.0
–
V
Battery Fall Early Warning Threshold
In Normal and Standby Modes
VBF(EW)
V
5.3
5.8
6.3
Battery Fall Early Warning Hysteresis
In Normal and Standby Modes (Note 16)
VBF(EW-HYST)
V
0.1
0.2
0.3
VDD TERMINAL (Note 17)
VDD Output Voltage (2.0 mA < IDD < 200 mA)
5.5 V < VSUP < 27 V
4.5 V < VSUP < 5.5 V
VDDOUT
V
4.9
5.0
5.1
4.0
–
–
Dropout Voltage
IDD = 200 mA
VDDDRP1
–
V
0.2
0.5
Dropout Voltage, Limited Output Current and Low VSUP
IDD = 50 mA, 4.5 V < VSUP
VDDDRP2
–
V
0.1
0.25
VDD Output Current
Internally Limited
IDD
mA
200
285
350
Thermal Shutdown (Junction)
Normal or Standby Mode
TSD
°C
160
–
200
Overtemperature Pre-Warning (Junction)
VDDTEMP Bit Set
TPW
°C
125
–
160
Temperature Threshold Difference
TSD - TPW
20
–
40
°C
RST Threshold, Selectable by RSTTH Bit in SPI Register RCR
Threshold 1, Default Value after Reset, RSTTH Bit set to 0
Threshold 2, RSTTH bit Set to 1
VRSTTH
V
4.5
4.6
4.7
4.0
4.2
4.3
VDD for Reset Active
VDDR
1.0
–
VRSTTH
V
Notes
14. Current measured at VSUP terminal.
15. Oscillator not running means none of the following functions are active: Forced Wake-Up and Cyclic Sense and Software Watchdog in Stop
mode.
16. Guaranteed by design; however, it is not production tested.
17. IDD is the total regulator output current. VDD specification with external capacitor. Stability requirement: Capacitance > 47 µF, ESR < 1.3 Ω
(tantalum capacitor). In Reset, Normal Request, Normal and Standby modes. Measures with capacitance = 47 µF tantalum.
MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA
For More Information On This Product,
Go to: www.freescale.com
33742
7