datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

T-8503 View Datasheet(PDF) - Agere -> LSI Corporation

Part Name
Description
View to exact match
T-8503
Agere
Agere -> LSI Corporation Agere
T-8503 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
T8502 and T8503 Dual PCM Codecs with Filters
Data Sheet
July 1998
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of this data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameter
Storage Temperature Range
Power Supply Voltage
Voltage on Any Pin with Respect to Ground
Maximum Power Dissipation (package limit)
Symbol
Tstg
VDD
PD
Min
–55
–0.5
Max
150
6.5
0.5 + VDD
600
Unit
°C
V
V
mW
Handling Precautions
Although protection circuitry has been designed into this device, proper precautions should be taken to avoid
exposure to electrostatic discharge (ESD) during handling and mounting. Lucent Technologies Microelectronics
Group employs a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and
protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the
model. No industry-wide standard has been adopted for CDM. However, a standard HBM (resistance = 1500 ,
capacitance = 100 pF) is widely used and, therefore, can be used for comparison purposes. The HBM ESD
threshold presented here was obtained by using these circuit parameters:
HBM ESD Threshold Voltage
Device
Rating
T8502
>2000
T8503
>2000
Electrical Characteristics
Specifications apply for TA = –40 °C to +85 °C, VDD = 5 V ± 5%, MCLK = either 2.048 MHz or 4.096 MHz, and
GND = 0 V, unless otherwise noted.
dc Characteristics
Table 2. Digital Interface
Parameter
Input Low Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
Symbol
VIL
VIH
VOL
VOH
Input Current, Pins 9, 12
II
Input Current, Pins 7, 8, 13, 14, 15
II
Input Current, Pins 5, 16
II
Output Current in High-impedance State
IOZ
Input Capacitance
CI
Test Conditions
All digital inputs
All digital inputs
DX, IL = 3.2 mA
DX, IL = –3.2 mA
DX, IL = –320 µA
GNDD < VIN < VDD
GNDD < VIN < VDD
GNDD < VIN < VDD
DX
Min Typ Max Unit
— — 0.8 V
2.0 — — V
— — 0.4 V
2.4 — — V
3.5 — — V
–10 — 10 µA
2 — 150 µA
–120 — –2 µA
–30 <±2 30 µA
— — 5 pF
4
Lucent Technologies Inc.
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]