datasheetbank_Logo   búsqueda de Hoja de datos y gratuito Fichas de descarga
Número de pieza  

CA0508KPY5V8BB121 Ver la hoja de datos (PDF) - YAGEO Corporation

Número de piezacomponentes Descripciónfabricante
CA0508KPY5V8BB121 Capacitor Arrays & Networks 15pF 50V NPO 5% YAGEO
YAGEO Corporation YAGEO
CA0508KPY5V8BB121 Datasheet PDF : 17 Pages
First Prev 11 12 13 14 15 16 17
Surface-Mount Ceramic Multilayer Capacitors 4C-Array
NP0/X7R/Y5V
Product specification 15
16 V to 50 V
17
TEST
TEST METHOD
Rapid Change IEC 60384- 4.11
of
21/22
Temperature
PROCEDURE
Preconditioning;
150 +0/10 °C for 1 hour, then keep for
24 ± 1 hours at room temperature
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
REQUIREMENTS
No visual damage
Δ C/C Class 1:
NP0: within ± 1% or 1 pF, whichever is greater
Class2:
X5R/X7R: ± 15% Y5V: ± 20%
Recovery time 24 ± 2 hours
D.F. meet initial specified value
Rins meet initial specified value
Damp Heat
with Ur Load
4.13 1. Preconditioning, class 2 only:
No visual damage after recovery
150 +0/-10 °C /1 hour, then keep for
24 ± 1 hour at room temp
C/C
2. Initial measure:
Class 1:
Spec: refer initial spec C, D, IR
NP0: within ± 2% or 1 pF, whichever is greater
3. Damp heat test:
Class2:
500 ± 12 hours at 40 ± 2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 1: 6 to 24 hours
Class 2: 24 ± 2 hours
5. Final measure: C, D, IR
X5R/X7R: ± 15%; Y5V: ± 30%
D.F.
Class 1: NP0: 2 x specified value
Class2:
X5R/X7R: 16V: 7%
25V: 5%
P.S. If the capacitance value is less than the
minimum value permitted, then after the
other measurements have been made the
capacitor shall be precondition according to
“IEC 60384 4.1” and then the requirement
shall be met.
Y5V: 15%
Rins
Class 1:
NP0: 2,500 MΩ or Rins x Cr 25s whichever is less
Class2:
X5R/X7R/Y5V: 500 MΩ or Rins x Cr 25s
whichever is less
Nov. 10, 2015 V.4
www.yageo.com
Direct download click here
 

Share Link : YAGEO
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Política De Privacidad ]