ADQ13Q04H View Datasheet(PDF) - Panasonic Corporation
Part Name
Description
View to exact match
ADQ13Q04H Datasheet PDF : 4 Pages
| |||
DQ (ADQ)
RATING
1. Coil data
1) 1 coil latching
Nominal coil
voltage
Set voltage*
(at 20°C 68°F)
4.5V DC
6V DC
9V DC
12V DC
24V DC
70%V or less of
nominal voltage
(Initial)
Reset voltage*
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
111.1mA
83.3mA
55.6mA
41.7mA
20.8mA
Coil resistance
[±10%] (at 20°C 68°F)
40.5Ω
72Ω
162Ω
288Ω
1,152Ω
Nominal operating
power
500mW
Max. applied voltage
(at 20°C 68°F)
130%V of
nominal voltage
2) 2 coil latching
Nominal coil
voltage
Set voltage*
(at 20°C 68°F)
4.5V DC
6V DC
9V DC
12V DC
24V DC
70%V or less of
nominal voltage
(Initial)
Reset voltage*
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
Set coil Reset coil
221.7mA 221.7mA
166.7mA 166.7mA
111.1mA 111.1mA
83.3mA 83.3mA
41.7mA 41.7mA
Coil resistance
[±10%] (at 20°C 68°F)
Set coil
20.3Ω
36Ω
81Ω
144Ω
576Ω
Reset coil
20.3Ω
36Ω
81Ω
144Ω
576Ω
Nominal operating
power
Set coil Reset coil
1,000mW 1,000mW
Max. applied voltage
(at 20°C 68°F)
130%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Item
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contact and coil
Surge breakdown
voltage*2 (Initial)
Between contact and coil
Set time (at 20°C 68°F) (Initial)
Reset time (at 20°C 68°F) (Initial)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Conditions for operation, transport and storage*3
Max. operating speed
Specifications
1 Form A
Max. 30 mΩ (By voltage drop 6 V DC 1A)
AgSnO2 type
30 A 250V AC
7,500 V A
250V AC
30 A AC
500mW (1 coil latching), 1,000mW (2 coil latching)
100mA 5 V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,500 Vrms for 1min. (Detection current: 10mA.)
4,000 Vrms for 1min. (Detection current: 10mA.)
Min. 10,000 V
Max. 20 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 20 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Min. 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 2.0 mm
Min. 106 (at 180 times/min.)
Min. 104 (At nominal switching capacity, operating frequency: 3s ON, 3s OFF)
Ambient temperature: –40 to +65°C –40 to +149°F
Humidity: 5 to 75% R.H. (Not freezing and condensing at low temperature)
10 times/min. (at rated load)
Approx. 35 g 1.23 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
–2–
ASCTB178E 201607-T
|
|
Share Link: 