Zilog
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to
Ground. Positive current flows into the referenced pin (Fig-
ure 5).
Z86E04/E08
CMOS Z8 OTP Microcontrollers
From Output
Under Test
1
150 pF
Figure 5. Test Load Diagram
CAPACITANCE
TA = 25°C, VCC = GND = 0V, f = 1.0 MHz, unmeasured pins returned to GND.
Parameter
Input capacitance
Output capacitance
I/O capacitance
Min
Max
0
10 pF
0
20 pF
0
25 pF
DS97Z8X0401
PRELIMINARY
7