datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

XE1203F View Datasheet(PDF) - Semtech Corporation

Part Name
Description
View to exact match
XE1203F Datasheet PDF : 36 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
XE1203F
XE1203F
433 MHz / 868 MHz / 915 MHz
Low-Power, Integrated UHF Transceiver
GENERAL DESCRIPTION
The XE1203F is a single chip transceiver operating in
the 433, 868 and 915 MHz license-free ISM (Industry
Scientific and Medical) frequency bands. Its highly
integrated architecture allows for minimum external
components while maintaining design flexibility. All
major RF communication parameters are
programmable and most of them can be dynamically
set. The XE1203F offers the excellent advantage of
high data rate communication at rates of up to 152.3
kbit/s, without the need to modify the number or
parameters of the external components. The
XE1203F is optimized for low power consumption
while offering high RF output power and exceptional
receiver sensitivity. The device is suitable for
applications which have to satisfy either the European
(ETSI-300-220) or the North American (FCC part 15)
regulatory standards. TrueRF™ technology enables a
low –cost external component count (elimination of
the SAW filter) whilst still satisfying ETSI and FCC
regulations.
APPLICATIONS
Automated Meter Reading (AMR)
Home Automation and Access Control
High-Quality Speech, Music and Data over RF
Applications requiring Konnex-compatibility
KEY PRODUCT FEATURES
RF output power: up to +15 dBm
High reception sensitivity: down to –114 dBm
(typical)
Low power consumption:
RX = 14 mA; TX = 62 mA @15 dBm (typical)
Supply voltage down to 2.4V
Data rate from 1.2 to 152.3 kbit/s, NRZ coding
Konnex-compatible operation mode
11-bit Barker encoder/decoder
On-chip frequency synthesizer with minimum
frequency resolution of 500 Hz
Continuous phase 2-level FSK modulation
Received data pattern recognition
Bit-Synchronizer for incoming data/clock
synchronization and recovery
RSSI (Received Signal Strength Indicator)
FEI (Frequency Error Indicator)
RoHS green package
ORDERING INFORMATION
Part number
XE1203FI063TRLF
Temperature
range
-40 °C to +85 °C
Package
VQFN48
Rev 1 March 2007
www.semtech.com
1
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]