datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

WM8860 View Datasheet(PDF) - Wolfson Microelectronics plc

Part Name
Description
View to exact match
WM8860
Wolfson
Wolfson Microelectronics plc Wolfson
WM8860 Datasheet PDF : 184 Pages
First Prev 41 42 43 44 45 46 47 48 49 50 Next Last
Pre-Production
WM8860
MIC2 (NID = 15h)
Table 18 gives a summary of the MIC2 node:
NODE SUMMARY INFORMATION
NID
15h
Widget Type
Audio Input Converter
Supported Get Verbs
Ah, F00h, F02h, F03h, F06h, F08h, F8Eh, FB1h
Supported Set Verbs
703h, 706h, 708h, 78Eh, 7B1h
Unsolicited Responses
Stream Drop
Vendor-Specific Verbs
F8Eh, 78Eh : Unsolicited Response Priority Control Verb
FB1h, 7B1h : Channel Copy Verb
Table 18 MIC2 Node Summary Information
The MIC2 node supports digital audio input at all common sample rates from 8kHz to 48kHz.
Note that the Stream Format Verb in the MIC2 widget (NID = 15h) is read-only; the associated
parameters will echo the values set in the same verb in the MIC1 widget.
The MIC2 output data is by default set to provide the captured waveform from the left channel in
Channel 0, and the right channel in Channel 1. It is possible to adjust this mapping using the vendor-
specific Channel Copy Verb:
SET VERB BIT
7B1h
1
0
BITFIELD
NAME
CHAN1_
SEL
CHAN0_
SEL
DEFAULT
DESCRIPTION
1
Channel 1 (right) Mapping Control:
0 = Channel 1 takes data from left audio
channel
1 = Channel 1 takes data from right audio
channel
0
Channel 0 (left) Mapping Control:
0 = Channel 0 takes data from left audio
channel
1 = Channel 0 takes data from right audio
channel
DIGITAL MICROPHONE INTERFACE CLOCK RATES
The sample rate of data captured by the digital microphone interface is controlled by the Stream
Format Verb in the MIC1 widget (NID = 03h). Note that the Stream Format Verb in the MIC2 widget
(NID = 15h) will echo the values set in the same verb in the MIC1 widget. This is necessary as
DMICCLK is shared between the DMICDAT1 and DMICDAT2 pins.
The DMICCLK frequency will output at the rates shown in Table 19, which also contains the required
settings for Base, Mult and Div as part of the Stream Format Verb of the MIC1 widget to obtain the
required sample rate:
SAMPLE RATE BASE
MULT[2:0]
DIV[2:0]
DMICCLK PROCESSING
FREQUENCY
RATE
8kHz
0h
0h
5h
1.024MHz
128fs
11.025kHz
1h
0h
3h
1.4112MHz
128fs
16kHz
0h
0h
2h
1.024MHz
64fs
22.05kHz
1h
0h
1h
1.4112MHz
64fs
32kHz
0h
1h
2h
2.048MHz
64fs
44.1kHz
1h
0h
0h
2.8224MHz
64fs
48kHz
0h
0h
0h
3.072MHz
64fs
Table 19 MIC1 Supported Sample Rate Settings for Digital Microphone Interface
Note: Other settings of Base, Mult and Div are reserved and should not be set.
w
PP, April 2011, Rev 3.2
47
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]