datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TDA1302T View Datasheet(PDF) - Philips Electronics

Part Name
Description
View to exact match
TDA1302T Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TDA1302_1 9 Wed Sep 14 13:30:56 1994
Philips Semiconductors
Data amplifier and laser supply circuit for
CD player and read only optical systems
Preliminary specification
TDA1302T
Notes to the characteristics
1. The maximum input current is defined as the current in which the gain reaches its minimum. Increasing the supply
voltage to VDD = 5 V increases the maximum input current (see also Figs 4 and 5).
2. The gain increases if a larger supply voltage is used (see also Fig.6).
3. Icsin is the sum of the diode input currents 1 to 4; Itsin is the sum of the diode input currents 5 and 6.
4. Transresistance 120 kmeans LOW gain, selected if HG = logic 0 (see Table 1).
5. Transresistance 240 kmeans HIGH gain, selected if HG = logic 1 (see Table 1).
6. Output voltage swing will be: VSRRF = VRFMO = VRFO(p-p).
7. Refers to equalized output only.
8. For single speed the gain ratio is defined as gain difference between 1 MHz and 100 kHz, while the flatness delay
is defined up to 1 MHz (see also Fig.7). For double speed the gain ratio is defined as gain difference between 2 MHz
and 200 kHz, while the flatness delay is defined up to 2 MHz.
Transfer function
The equalized amplifier including Cext and Rext has the following transfer functions, where ‘rfe’ refers to equalized output
only and ‘rf’ refers to equalized and not equalized outputs.
FOR SINGLE SPEED (SP = LOGIC 1)
V-I--c--rs--fi-ne- = Rrf × 1-----+-----1--------Q--1----×-----sk---s----ω2----o---s---ω+----2-s--o--2s------ω----2---o---s- × 1-----+-----s-1------ω-----1 × 1-----+-----s----R----e--1-x---t--×-----C-----e---x--t
(1)
FOR DOUBLE SPEED (SP = LOGIC 0)
V-I--c--rs--fi-ne- = Rrf × 1-----+-----1--------Q--1----×-----sk----s---ω2----o---d---ω-+---2--s-o--2-s-----ω-----2--o---d- × -1----+-----s----R----e--1-x---t--×-----C-----e---x--t
The denominator forms the denominator of a Bessel low-pass filter.
Table 2 Transresistance.
SYMBOL
k
ωos/ω1 = ωod/ω2
Q
ωod = 2 × ωos
RRF
Rext
Cext
DESCRIPTION
internally defined
internally defined
internally defined
internally defined
see Chapter “Characteristics”
external resistor
external capacitor
(2)
TYP.
4
1.094
0.691
17.6 × 106
750
47
UNIT
rad/s
pF
September 1994
9
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]