UC2844N View Datasheet(PDF) - ON Semiconductor
Part Name
Description
View to exact match
UC2844N Datasheet PDF : 16 Pages
| |||
UC3844, UC3845, UC2844,
UC2845
High Performance
Current Mode Controllers
The UC3844, UC3845 series are high performance fixed frequency
current mode controllers. They are specifically designed for Off−Line
and DC−to−DC converter applications offering the designer a cost
effective solution with minimal external components. These integrated
circuits feature an oscillator, a temperature compensated reference, high
gain error amplifier, current sensing comparator, and a high current
totem pole output ideally suited for driving a power MOSFET.
Also included are protective features consisting of input and
reference undervoltage lockouts each with hysteresis, cycle−by−cycle
current limiting, a latch for single pulse metering, and a flip−flop which
blanks the output off every other oscillator cycle, allowing output dead
times to be programmed for 50% to 70%.
These devices are available in an 8−pin dual−in−line plastic package
as well as the 14−pin plastic surface mount (SOIC−14). The SOIC−14
package has separate power and ground pins for the totem pole output
stage.
The UCX844 has UVLO thresholds of 16 V (on) and 10 V (off),
ideally suited for off−line converters. The UCX845 is tailored for
lower voltage applications having UVLO thresholds of 8.5 V (on) and
7.6 V (off).
Features
• Current Mode Operation to 500 kHz Output Switching Frequency
• Output Deadtime Adjustable from 50% to 70%
• Automatic Feed Forward Compensation
• Latching PWM for Cycle−By−Cycle Current Limiting
• Internally Trimmed Reference with Undervoltage Lockout
• High Current Totem Pole Output
• Input Undervoltage Lockout with Hysteresis
• Low Startup and Operating Current
• Direct Interface with ON Semiconductor SENSEFETt Products
• Pb−Free Packages are Available
VCC 7(12)
Vref
8(14)
RTCT
4(7)
Voltage
Feedback
2(3)
1(1)
Output
Comp.
R
5.0V
Reference
VCC
Undervoltage
Lockout
R
Vref
Undervoltage
Lockout
Oscillator
+
−
Error
Amplifier
Flip
Flop
&
Latching
PWM
GND 5(9)
Pin numbers in parenthesis are for the D suffix SOIC−14 package.
Figure 1. Simplified Block Diagram
VC
7(11)
Output
6(10)
PWR GND
5(8)
Current
Sense
3(5)
© Semiconductor Components Industries, LLC, 2006
1
July, 2006 − Rev. 7
http://onsemi.com
8
1
14
1
8
1
PDIP−8
N SUFFIX
CASE 626
SOIC−14
D SUFFIX
CASE 751A
SOIC−8
D1 SUFFIX
CASE 751A
PIN CONNECTIONS
Compensation 1
Voltage Feedback 2
Current Sense 3
RT/CT 4
8 Vref
7 VCC
6 Output
5 GND
(Top View)
Compensation 1
NC 2
Voltage Feedback 3
NC 4
Current Sense 5
NC 6
RT/CT 7
14 Vref
13 NC
12 VCC
11 VC
10 Output
9 GND
8 Power Ground
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page page 14 of this data sheet.
Publication Order Number:
UC3844/D
|
|
Share Link: 