UAA2080H View Datasheet(PDF) - Philips Electronics
Part Name
Description
View to exact match
UAA2080H Datasheet PDF : 44 Pages
| |||
Philips Semiconductors
Advanced pager receiver
Product specification
UAA2080
FEATURES
• Wide frequency range: VHF, UHF and 900 MHz bands
• High sensitivity
• High dynamic range
• Electronically adjustable filters on chip
• Suitable for data rates up to 2400 bits/s
• Wide frequency offset and deviation range
• Fully POCSAG compatible FSK receiver
• Power on/off mode selectable by the chip enable input
• Low supply voltage; low power consumption
• High integration level
• Interfaces directly to the PCA5000A, PCF5001 and
PCD5003 POCSAG decoders.
APPLICATIONS
• Wide area paging
• On-site paging
• Telemetry
• RF security systems
• Low bit-rate wireless data links.
GENERAL DESCRIPTION
The UAA2080 is a high-performance low-power radio
receiver circuit primarily intended for VHF, UHF and
900 MHz pager receivers for wide area digital paging
systems, employing direct FM non-return-to-zero (NRZ)
frequency shift keying (FSK).
The receiver design is based on the direct conversion
principle where the input signal is mixed directly down to
the baseband by a local oscillator on the signal frequency.
Two complete signal paths with signals of 90° phase
difference are required to demodulate the signal.
All channel selectivity is provided by the built-in IF filters.
The circuit makes extensive use of on-chip capacitors to
minimize the number of external components.
The UAA2080 was designed to operate together with the
PCA5000A, PCF5001 or PCD5003 POCSAG decoders,
which contain a digital input filter for optimum call success
rate.
ORDERING INFORMATION
TYPE
NUMBER
UAA2080H
UAA2080T
UAA2080U
NAME
LQFP32
SO28
28 pads
PACKAGE
DESCRIPTION
plastic low profile quad flat package; 32 leads; body 7 × 7 × 1.4 mm
plastic small outline package; 28 leads; body width 7.5 mm
naked die; see Fig.9
VERSION
SOT358-1
SOT136-1
1996 Jan 15
2
|
|
Share Link: 