datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

U.FL-2LPV-04N2T-A-L View Datasheet(PDF) - HIROSE ELECTRIC

Part NameDescriptionManufacturer
U.FL-2LPV-04N2T-A-L Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height Hirose
HIROSE ELECTRIC Hirose
U.FL-2LPV-04N2T-A-L Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. PleaUse.FchLecSk tehreieprsoqduUctlstsrtaatuSsmonathlleSHiurorsfeawceebsMiteoRuoHnStseCaorcahxatiawlwCw.hoirnosnee-ccotnonercsto-rs1.c.o9mm, omr coontrac2t.y4omur mHirMoseastaeleds Hreepriegshenttative.
sUsage Precautions
1. Plugs
(1) Mating / unmating
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
Extraction Jig
aligned and the connectors can be mated. The "click" will confirm fully
mated connection.Do not attempt to insert on an extreme angle.
U.FL Cable
Assembly
U.FL-R-SMT-1
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
(2) Pull forces on the
cable after connectors
are mated.
U.FL-LP
Cable Assembly
U.FL-R-SMT-1
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
3N max (U.FL-LP(V)-040, U.FL-LP-062)
4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
(3) Precautions
2. Receptacles
Do NOT forcefully twist or deform wires.
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
[ç]
260
240
220
200
(1) Recommended reflow
180
temperature profile
160
140
120
100
80
250 ç max. for
10 seconds
Preheat
(130 to 180ç)
230ç
220ç
120 seconds max.
Time
50 seconds max.
60 seconds max.
q The temperature of the printed circuit board
surface temperature at the points of contact with
the terminals.
w Reflow soldering should be performed at a
printed circuit surface temperature of 250°C max.
e In individual applications the actual temperature
may vary, depending on the solder paste type,
volume / thickness and board size / thickness.
Consuly your solder paste and equipment
manufacturer for specific recommendations.
(2) Recommended
manual soldering
Manual soldering: 350˚C for 5 seconds
(3) Recommended metal
mask thickness
(4) Reflow cycles
0.1 to 0.12 mm
2 times
3. Operating environment and storage conditions
(1) Operating environment
The connectors are not designed to operate in the following environments:
Exposed to a excessive amounts of fine particles and dust
Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
Environments having large rapid variations in temperature.
(2) Storage conditions -
Receptacle
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
7
Direct download click here
 

Share Link : Hirose
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]