TS914IN View Datasheet(PDF) - STMicroelectronics
Part Name
Description
View to exact match
TS914IN Datasheet PDF : 19 Pages
| |||
TS914
1
Absolute maximum ratings and operating conditions
Absolute maximum ratings and operating conditions
Table 1.
Symbol
VCC
Vid
Vi
Iin
Io
Tj
Tstg
Rthja
Absolute maximum ratings
Parameter
Test conditions
Supply voltage (1)
Differential input voltage (2)
Input voltage (3)
Current on inputs
Current on outputs
Maximum junction temperature
Storage temperature
Thermal resistance junction to
ambient (4)
DIP-14
SO-14
Value
18
±18
-0.3 to 18
±50
±130
150
-65 to +150
83
103
Unit
V
V
V
mA
mA
°C
°C
°C/W
Rthjc
ESD
Thermal resistance junction to
case
HBM: human body model(5)
MM: machine model(6)
CDM: charged device model(7)
DIP-14
SO-14
33
°C/W
31
1
kV
50
V
1.5
kV
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC+ +0.3V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuit on all amplifiers. These are typical values.
5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range
Operating free air temperature range
2.7 to 16
V
VCC- -0.2 to VCC+ +0.2 V
-40 to + 125
°C
3/19
|
|
Share Link: 