datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

Z86C4312PEC View Datasheet(PDF) - Zilog

Part Name
Description
View to exact match
Z86C4312PEC Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Z86C33/C43
CP95DZ80202
CUSTOMER PROCUREMENT SPECIFICATION
FEATURES
ROM
Part
(KB)
Z86C33
4
Z86C43
4
* General-Purpose
RAM*
(Bytes)
237
236
Speed
(MHz)
12, 16
12, 16
s 40-Pin DIP, 44-Pin PLCC and QFP Packages (C43)
28-Pin DIP, 28-Pin SOIC (C33)
s 3.0- to 5.5-Volt Operating Range
s Low-Power Consumption
s –40°C to +105°C Operating Range
s Expanded Register File (ERF)
Z86C33/C43
CMOS Z8®
CONSUMER CONTROLLER PROCESSOR
s 32 Input/Output Lines (C43)
24 Input/Output Lines (C33)
s Vectored, Prioritized Interrupts with
Programmable Polarity
s Two Analog Comparators
s Two Programmable 8-Bit Counter/Timers,
Each with Two 6-Bit Programmable Prescaler
s Watch-Dog Timer (WDT)/Power-On Reset (POR)
s On-Chip Oscillator that Accepts a Crystal, Ceramic
Resonator, LC, RC, or External Clock
s RAM and ROM Protect
GENERAL DESCRIPTION
The Z86C33/C43 Consumer Controller Processor (CCP)
is a member of Zilog's Z8® single-chip microcontroller
family with enhanced wake-up circuitry, programmable
Watch-Dog Timers (WDT), and low-noise/EMI options.
These enhancements result in a more efficient, cost-
effective design and provide the user with increased
design flexibility over the standard Z8 microcontroller
core. This low-power consumption CMOS microcontroller
offers fast execution, efficient use of memory, sophisti-
cated interrupts, input/output bit manipulation capabili-
ties, and easy hardware/software system expansion.
The Z86C33/C43 features an Expanded Register File
(ERF) to allow access to register-mapped peripheral and
I/O circuits. Four basic address spaces are available to
support this wide range of configurations: Program Memory,
Register File, Data Memory, and ERF. The Register File is
composed of 236 bytes of general-purpose registers, four
I/O port registers, and 15 control and status registers. The
ERF consists of three control registers
For applications demanding powerful I/O capabilities, the
Z86C33 provides 24 pins, and the Z86C43 provides 32
pins dedicated to input and output. These lines are
configurable under software control to provide timing,
status signals, parallel I/O with or without handshake, and
address/data bus for interfacing external memory.
To unburden the system from coping with real-time tasks
such as counting/timing and data communication, the
Z86C33/C43 offers two on-chip counter/timers with a large
number of user-selectable modes.
With ROM/ROMless selectivity, the Z86C43 provides both
external memory and pre-programmed ROM, which
enables this Z8 microcontroller to be used in high-volume
applications, or where code flexibility is required.
Notes:
All Signals with a preceding front slash, "/", are active Low, e.g.:
B//W (WORD is active Low); /B/W (BYTE is active Low, only).
Power connections follow conventional descriptions below:
Connection
Power
Ground
Circuit
VCC
GND
Device
VDD
VSS
CP95DZ80202 9/95
1
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]