datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

TMP06BKS-REEL7 View Datasheet(PDF) - Analog Devices

Part NameDescriptionManufacturer
TMP06BKS-REEL7 ±0.5°C Accurate PWM Temperature Sensor in 5-Lead SC-70 ADI
Analog Devices ADI
TMP06BKS-REEL7 Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TMP05/TMP06
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
Rating
VDD to GND
Digital Input Voltage to GND
Maximum Output Current (OUT)
Operating Temperature Range1
Storage Temperature Range
Maximum Junction Temperature, TJMAX
5-Lead SOT-23
Power Dissipation2
Thermal Impedance4
θJA, Junction-to-Ambient (Still Air)
5-Lead SC-70
Power Dissipation2
Thermal Impedance4
–0.3 V to +7 V
–0.3 V to VDD + 0.3 V
±10 mA
–40°C to +150°C
–65°C to +160°C
150°C
WMAX = (TJ max – TA3)/θJA
240°C/W
WMAX = (TJ max – TA3)/θJA
θJA, Junction-to-Ambient
θJC, Junction-to-Case
IR Reflow Soldering
Peak Temperature
Time at Peak Temperature
Ramp-Up Rate
Ramp-Down Rate
207.5°C/W
172.3°C/W
220°C (0°C/5°C)
10 s to 20 s
2°C/s to 3°C/s
–6°C/s
1 It is not recommended to operate the device at temperatures above 125°C
for more than a total of 5% (5,000 hours) of the lifetime of the device. Any
exposure beyond this limit affects device reliability.
2 SOT-23 values relate to the package being used on a 2-layer PCB and SC-70
values relate to the package being used on a 4-layer PCB. See Figure 4 for a
plot of maximum power dissipation versus ambient temperature (TA).
3 TA = ambient temperature.
4 Junction-to-case resistance is applicable to components featuring a
preferential flow direction, for example, components mounted on a heat
sink. Junction-to-ambient resistance is more useful for air-cooled PCB
mounted components.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
–40 –20 0
SC-70
SOT-23
20 40 60 80 100 120 140
TEMPERATURE (°C)
Figure 4. Maximum Power Dissipation vs. Temperature
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 8 of 28
Direct download click here
 

Share Link : ADI
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]