datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

CP82C55A-5 View Datasheet(PDF) - Harris Semiconductor

Part Name
Description
View to exact match
CP82C55A-5
Harris
Harris Semiconductor Harris
CP82C55A-5 Datasheet PDF : 26 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
82C55A
MODE 0
MODE DEFINITION SUMMARY
MODE 1
MODE 2
IN
OUT
IN
OUT
GROUP A ONLY
PA0
In
Out
In
Out
PA1
In
Out
In
Out
PA2
In
Out
In
Out
PA3
In
Out
In
Out
PA4
In
Out
In
Out
PA5
In
Out
In
Out
PA6
In
Out
In
Out
PA7
In
Out
In
Out
PB0
In
Out
In
Out
PB1
In
Out
In
Out
PB2
In
Out
In
Out
PB3
In
Out
In
Out
PB4
In
Out
In
Out
PB5
In
Out
In
Out
PB6
In
Out
In
Out
PB7
In
Out
In
Out
Mode 0
or Mode 1
Only
PC0
In
Out
INTRB
INTRB
I/O
PC1
In
Out
IBFB
OBFB
I/O
PC2
In
Out
STBB
ACKB
I/O
PC3
In
Out
INTRA
INTRA
INTRA
PC4
In
Out
STBA
I/O
STBA
PC5
In
Out
IBFA
I/O
IBFA
PC6
In
Out
I/O
ACKA
ACKA
PC7
In
Out
I/O
OBFA
OBFA
Special Mode Combination Considerations
There are several combinations of modes possible. For any
combination, some or all of Port C lines are used for control
or status. The remaining bits are either inputs or outputs as
defined by a “Set Mode” command.
During a read of Port C, the state of all the Port C lines,
except the ACK and STB lines, will be placed on the data
bus. In place of the ACK and STB line states, flag status will
appear on the data bus in the PC2, PC4, and PC6 bit
positions as illustrated by Figure 17.
Through a “Write Port C” command, only the Port C pins
programmed as outputs in a Mode 0 group can be written.
No other pins can be affected by a “Write Port C” command,
nor can the interrupt enable flags be accessed. To write to
any Port C output programmed as an output in Mode 1 group
or to change an interrupt enable flag, the “Set/Reset Port C
Bit” command must be used.
With a “Set/Reset Port Cea Bit” command, any Port C line
programmed as an output (including IBF and OBF) can be
written, or an interrupt enable flag can be either set or reset.
Port C lines programmed as inputs, including ACK and STB
lines, associated with Port C fare not affected by a
“Set/Reset Port C Bit” command. Writing to the correspond-
ing Port C bit positions of the ACK and STB lines with the
“Set Reset Port C Bit” command will affect the Group A and
Group B interrupt enable flags, as illustrated in Figure 17.
INPUT CONFIGURATION
D7 D6 D5 D4 D3 D2 D1 D0
I/O I/O IBFA INTEA INTRA INTEB IBFB INTRB
GROUP A
GROUP B
D7 D6
OBFA INTEA
OUTPUT CONFIGURATION
D5 D4 D3 D2 D1 D0
I/O I/O INTRA INTEB OBFB INTRB
GROUP A
GROUP B
FIGURE 15. MODE 1 STATUS WORD FORMAT
D7 D6 D5 D4 D3 D2 D1 D0
OBFA INTE1 IBFA INTE2 INTRA X
X
X
GROUP A
GROUP B
(Defined by Mode 0 or Mode 1 Selection)
FIGURE 16. MODE 2 STATUS WORD FORMAT
Current Drive Capability
Any output on Port A, B or C can sink or source 2.5mA. This
feature allows the 82C55A to directly drive Darlington type
drivers and high-voltage displays that require such sink or
source current.
13
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]