datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TLP118TPL View Datasheet(PDF) - Toshiba

Part Name
Description
View to exact match
TLP118TPL Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TLP118
PRECAUTIONS OF SURFACE MOUNTING TYPE PHOTOCOUPLER SOLDERING &
GENERAL STORAGE
(1) Precautions for Soldering
1) When Using Soldering Reflow
z An example of a temperature profile when Sn-Pb eutectic solder is used:
This profile is based on the device’s
maximum heat resistance guaranteed
value.
Set the preheat temperature/heating
temperature to the optimum temperature
corresponding to the solder paste type
used by the customer within the
described profile.
z An example of a temperature profile when lead(Pb)-free solder is used:
This profile is based on the device’s
maximum heat resistance guaranteed
value.
Set the preheat temperature/heating
temperature to the optimum temperature
corresponding to the solder paste type
used by the customer within the
described profile.
z Reflow soldering must be performed once or twice.
z The mounting should be completed with the interval from the first to the last mountings being 2 weeks.
2) When using soldering Flow (Applicable to both eutectic solder and Lead(Pb)-Free solder)
z Apply preheating of 150 deg.C for 60 to 120 seconds.
z Mounting condition of 260 deg.C or less within 10 seconds is recommended.
z Flow soldering must be performed once
3) When using soldering Iron (Applicable to both eutectic solder and Lead(Pb)-Free solder)
z Complete soldering within 10 seconds for lead temperature not exceeding 260 deg.C or within 3 seconds
not exceeding 350 deg.C.
z Heating by soldering iron must be only once per 1 lead
8
2010-03-02
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]