datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TS68882VR16 View Datasheet(PDF) - Atmel Corporation

Part Name
Description
View to exact match
TS68882VR16 Datasheet PDF : 43 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TS68882
Mechanical and
Environmental
Marking
Quality Conformance
Inspection
DESC/MIL-STD-883
The microcircuits shall meet all mechanical environmental requirements of either MIL-
STD-883 for class B devices.
The document defines the markings that are identified in the related reference docu-
ments. Each microcircuit is legible and permanently marked with the following
information as minimum:
Atmel-Grenoble Logo
Manufacturers Part Number
Class B Identification
Date-code of inspection lot
ESD Identifier if Available
Country of Manufacturing
Is in accordance with MIL-M-38510 and method 5005 of MIL-STD-883. Group A and B
inspections are performed on each production lot. Group C and D inspection are per-
formed on a periodical basis.
Electrical
Characteristics
General Requirements
All static and dynamic electrical characteristics specified and the relevant measurement
conditions are given below. For inspection purpose, refer to relevant specification:
Static electrical characteristics for all electrical variants.
Dynamic electrical characteristics for 68882-16 (16.67 MHz), 68882-20 (20 MHz),
68882-25 (25 MHz) and 68882-33 (33 MHz).
For static characteristics, test methods refer to clause Test Loadon page 13 hereafter
of this specification (Table 5).
For dynamic characteristics (Tables 6 and 7), test methods refer to IEC 748-2 method
number, where existing.
Table 5. Static Characteristics
VCC = 5.0 VDC ± 10%; GND = 0 VDC; Tc = -55/+125°C or -40/+85°C
Symbol Parameter
Min
Max
Unit
VIH
Input High Voltage
2.0
VCC
V
VIL
Input Low Voltage
GND - 0.3
0.8
V
IIN
Input Leakage Current at 5.5V CLK, RESET, R/W, A0-A4, CS, DS, AS, SIZE
10
µA
ITSI
HI-Z (off state) Input Current at 2.4V/0.4V DSACK0, DSACK1, D0-D31
VOH
Output High Voltage (IOH = -400 µA)(1) DSACK0, DSACK1, D0-D31
VOL
Output Low Voltage (IOL = 5.3 mA)(1) DSACK0, DSACK1, D0-D31
20
µA
2.4
V
0.5
V
IOL
Output Low Current (VOL = GND) SENSE
500
µA
9
2119AHIREL04/02
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]