CXP80712A View Datasheet(PDF) - Sony Semiconductor
Part Name
Description
View to exact match
CXP80712A Datasheet PDF : 24 Pages
| |||
CXP80712A/80716A/80720A/80724A
Symbol
PG0/CFG
PG1/DFG
PG2/DPG
PG3/PBCTL
PG4/SYNC0
PG5/SYNC1
PG6/EXI0
PG7/EXI1
I/O
Input/input
Input/input
Input/input
Input/input
Input/input
Input/input
Input/input
Input/input
PH0 to PH7 Output
PI1/RMC
PI2/PWM
PI3/TO/
DDO/ADJ
PI4/INT1/
NMI
PI5/SCK1
PI6/SO1
PI7/SI1
PJ0 to PJ7
I/O/input
I/O/output
I/O/output/
output/output
I/O/input/Input
I/O/I/O
I/O/output
I/O/input
I/O
EXTAL
XTAL
TEX
TX
RST
MP
AVDD
AVREF
AVss
VDD
Vss
Input
Output
Input
Output
Input
Input
Input
(Port G)
8-bit input port.
(8 pins)
Description
Capstan FG input pin.
Drum FG input pin.
Drum PG input pin.
Playback CTL pulse input pin.
Composite sync signal input pin.
External input pin to FRC capture unit.
(Port H)
8-bit output port ; Medium withstand voltage (12V) and high current
(12mA), N-ch open drain output.
(8 pins)
Remote control receiving circuit input pin.
14-bit PWM output pin.
(Port I)
7-bit I/O port.
I/O port can be
specified by bit
unit.
(7 pins)
Timer/counter, CTL duty detection, 32kHz
oscillation adjustment output pin.
Input pin to request external interruption and non
maskable interruption. Active when falling edge.
Serial clock (CH1) I/O pin.
Serial data (CH1) output pin.
Serial data (CH1) input pin.
(Port J)
8-bit I/O port. Function as standby release input can be specified by bit
unit. I/O can be specified by bit unit.
Connecting pin of crystal oscillator for system clock. When supplying
the external clock, input the external clock to EXTAL pin and input
opposite phase clock to XTAL pin.
Connecting pin of crystal oscillator for 32kHz timer clock. When used
as event counter, input to TEX pin and leave TX pin open. (Feedback
resistor is not removed.)
System reset pin of active "L" level.
Microprocessor mode input pin. Always connect to GND.
Positive power supply pin of A/D converter.
Reference voltage input pin of A/D converter.
GND pin of A/D converter.
Positive power supply pin.
GND pin. Connect both Vss pins to GND.
–6–
|
|
Share Link: 