TEA1733MT View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

View to exact match

TEA1733MT

GreenChip SMPS control IC

NXP Semiconductors. 

NXP Semiconductors

TEA1733MT

GreenChip SMPS control IC

7.9 Current mode control (ISENSE pin)

Current mode control is used for its good line regulation.

The primary current is sensed by the ISENSE pin across an external resistor R9 (see

Figure 3) and compared with an internal control voltage. The internal control voltage is

proportional to the CTRL pin voltage (see Figure 6).

0.6

Vsense(max)

(V)

0.4

frequency

reduction

0.2

014aaa931

0

0

1

2

3

4

VCTRL (V)

Fig 6. Peak current control

Leading edge blanking prevents false triggering due to capacitive discharge when

switching on the external power switch (see Figure 7).

tleb

Vsense(max)

VISENSE

Fig 7. Leading edge blanking

t

014aaa932

7.10 Overpower or high/low line compensation (VINSENSE and

ISENSE pins)

The overpower compensation function can be used to realize a maximum output power

which is nearly constant over the full input mains.

The overpower compensation circuit measures the input voltage on the VINSENSE pin

and outputs a proportionally dependent current on the ISENSE pin. The DC voltage

across the soft start resistor limits the maximum peak current on the current sense resistor

(see Figure 8).

TEA1733MT

Preliminary data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 1 — 4 February 2011

© NXP B.V. 2011. All rights reserved.

8 of 20

Share Link: