datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

TDA1386 View Datasheet(PDF) - Philips Electronics

Part Name
Description
View to exact match
TDA1386
Philips
Philips Electronics Philips
TDA1386 Datasheet PDF : 24 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
Noise shaping filter DAC
Product specification
TDA1386T
Volume control
A digital level control is incorporated on the TDA1386T
which performs the function of soft mute and attenuation
(pseudo-static application mode) or soft mute, attenuation,
fade, increment and decrement (microcontroller
application mode). The volume control of both channels
can be varied in small step changes, determined by the
value of the internal fade counter according to:
Audio level = counter × maximum level/120.
Where the counter is a 7-bit binary number between
0 and 120. The time taken for mute to vary from 120 to 0
is 120/fs. For example, when fs = 44.1 kHz, the time taken
is approximately 3 ms.
VOLUME CONTROL IN PSEUDO-STATIC APPLICATION MODE
In the pseudo-static application mode (APPL = logic 0) the
digital audio output level is controlled by APP0
(attenuation) and APP2 (mute) so only the final volume
levels full scale, 12 dB (attenuate) and mute (infin dB)
can be selected. The mute function has priority over the
attenuation function. Accordingly, if MUSB is LOW, the
state of ATSB has no effect. An example of volume control
in this application mode is illustrated in Fig.5.
Fig.5 Volume control; pseudo-static application mode.
1998 Jan 06
9
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]