datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

E-STLC3075 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
E-STLC3075 Datasheet PDF : 36 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
STLC3075
Integrated POTS interface
for home access gateway and WLL
Features
Monochip SLIC optimized for WLL & VoIP
applications
Implements all Borsht function key features
Single supply (4.5 V to 12 V) for fly-back
configuration
Single supply (5.5 V to 12 V) for buck-boost
configuration
Built in DC/DC converter controller
Soft battery reversal with programmable
transition time
On-hook transmission
Programmable off-hook detector threshold
Metering pulse generation and filter
Integrated ringing
Integrated ring trip
Parallel control interface (3.3 V logic level)
Programmable constant current feed
Surface mount package
Integrated thermal protection
Dual gain value option
Automatic recognition flyback and buckboost
configuration
BCDIIIS 90V technology
-40 °C to +85 °C operating range
Description
The STLC3075 is a SLIC device specifically
designed for WLL (Wireless Local Loop), and
ISDN terminal adaptors and VoIP applications.
One distinctive characteristic of this device is its
ability to operate with a single supply voltage
(from +4.5 V to +12 V) and to self generate the
negative battery by means of an on-chip DC/DC
converter controller that drives an external MOS
switch.
LQFP44
The battery level is properly adjusted depending
on the operating mode. A useful characteristic for
these applications is the integrated ringing
generator.
The control interface is parallel with open drain
output and 3.3 V logic levels.
The metering pulses are generated on-chip
starting from two logic signals (0 and 3.3 V): one
signal defining the metering pulse frequency, the
other signal defining the metering pulse duration.
An on-chip circuit then provides the proper
shaping and filtering. Metering pulse amplitude
and shaping (rising and decay time) can be
programmed by external components.
A dedicated cancellation circuit avoids possible
codec input saturation due to metering pulse
echo.
Constant current feed can be set from 20 mA to
40 mA. Off-hook detection threshold is
programmable from 5 mA to 9 mA.
The device, which is developed in BCDIIIS
technology (90 V process), operates in the
extended temperature range and integrates a
thermal protection that sets the device in power
down when Tj exceeds 140 °C.
Table 1. Device summary
Order code
Package
E-STLC3075(1)
LQFP44
1. ECOPACK® (see Section 9)
Packing
Tray
March 2009
Rev 8
1/36
www.st.com
1
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]