ST62T03-EPB/110 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

View to exact match

ST62T03-EPB/110

EPROM PROGRAMMING BOARDS FOR ST62 MCU FAMILY

STMicroelectronics 

ST62Exx-EPB

EPROM PROGRAMMING BOARDS FOR ST62 MCU FAMILY

HARDWARE FEATURES

s Programs the ST62Exx EPROM and OTP

MCUs

s Standalone and Remote modes

s All packages supported (except SSOP)

SOFTWARE FEATURES

s Windows 95, 98, NT software

s S19 or INTEL hex file formats

DESCRIPTION

Different programming boards are designed for

programming the various EPROM and OTP devic-

es of the ST62 microcontroller family. For a partic-

ular device, all available packages (except SSOP)

are supported by the same programming board.

It can run either in standalone or remote mode

(connected to a PC).

In standalone mode, the microcontrollers can be

programmed by simply pressing a key to start cop-

ying the code from a master EPROM device or a

master microcontroller. Two-color LEDs indicate if

the operation has passed or failed.

In standalone mode an EPROM memory or a

master MCU is plugged into the programming

board. The code from the EPROM or the master

MCU is read and programmed into the ST62

EPROM or OTP device. Both VERIFY and BLANK

CHECK functions are provided.

In remote mode, the programming board is con-

nected to a PC through an RS232 serial channel

or a parallel port. Object code in either S19 or IN-

TEL HEX format is read from disk file to program

the ST62 EPROM or OTP device. The Windows

software also offers VERIFY, BLANK CHECK,

READ MASTER functions. The software allows

various user friendly facilities, such as re-instating

the same programming session, user selectable

programming steps; it also allows serial number-

ing with auto-incrementation.

October 2000

This is advance information from STMicroelectronics. Details are subject to change without notice.

1/3

643

Share Link: