datasheetbank_Logo    データシート検索エンジンとフリーデータシート
部品番号 :

1-100071-04 データシートの表示(PDF) - Unspecified

部品番号1-100071-04 ETC
Unspecified 
コンポーネント説明Humidity and Temperature Sensor
1-100071-04 Datasheet PDF : 11 Pages
First Prev 11
Datasheet SHT7x
Revision History
Date
March 2007
August 2007
July 2008
July 2008
Version
3.0
3.01
4.0
4.1
Page(s)
1 – 10
1 – 10
1 – 10
1, 4
Changes
Data sheet valid for SHTxx-V4 and SHTxx-V3
Electrical characteristics added, measurement time corrected
New release, rework of datasheet
Pin assignment corrected
Important Notices
Warning, Personal Injury
Do not use this product as safety or emergency stop devices or in
any other application where failure of the product could result in
personal injury. Do not use this product for applications other
than its intended and authorized use. Before installing, handling,
using or servicing this product, please consult the data sheet and
application notes. Failure to comply with these instructions could
result in death or serious injury.
If the Buyer shall purchase or use SENSIRION products for any
unintended or unauthorized application, Buyer shall defend, indemnify
and hold harmless SENSIRION and its officers, employees,
subsidiaries, affiliates and distributors against all claims, costs,
damages and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated
with such unintended or unauthorized use, even if SENSIRION shall be
allegedly negligent with respect to the design or the manufacture of the
product.
ESD Precautions
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage and/or
degradation, take customary and statutory ESD precautions when
handling this product.
See application note “ESD, Latchup and EMC” for more information.
Warranty
SENSIRION warrants solely to the original purchaser of this product for
a period of 12 months (one year) from the date of delivery that this
product shall be of the quality, material and workmanship defined in
SENSIRION’s published specifications of the product. Within such
period, if proven to be defective, SENSIRION shall repair and/or
replace this product, in SENSIRION’s discretion, free of charge to the
Buyer, provided that:
notice in writing describing the defects shall be given to
SENSIRION within fourteen (14) days after their
appearance;
such defects shall be found, to SENSIRION’s reasonable
satisfaction, to have arisen from SENSIRION’s faulty design,
material, or workmanship;
the defective product shall be returned to SENSIRION’s
factory at the Buyer’s expense; and
the warranty period for any repaired or replaced product
shall be limited to the unexpired portion of the original
period.
This warranty does not apply to any equipment which has not been
installed and used within the specifications recommended by
SENSIRION for the intended and proper use of the equipment.
EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH
HEREIN, SENSIRION MAKES NO WARRANTIES, EITHER EXPRESS
OR IMPLIED, WITH RESPECT TO THE PRODUCT. ANY AND ALL
WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY EXCLUDED AND DECLINED.
SENSIRION is only liable for defects of this product arising under the
conditions of operation provided for in the data sheet and proper use of
the goods. SENSIRION explicitly disclaims all warranties, express or
implied, for any period during which the goods are operated or stored
not in accordance with the technical specifications.
SENSIRION does not assume any liability arising out of any application
or use of any product or circuit and specifically disclaims any and all
liability, including without limitation consequential or incidental
damages. All operating parameters, including without limitation
recommended parameters, must be validated for each customer’s
applications by customer’s technical experts. Recommended
parameters can and do vary in different applications.
SENSIRION reserves the right, without further notice, (i) to change the
product specifications and/or the information in this document and (ii) to
improve reliability, functions and design of this product.
Copyright© 2007, SENSIRION.
CMOSens® is a trademark of Sensirion
All rights reserved
Headquarter and Sales Offices
Headquarter
SENSIRION AG
Laubisruetistr. 50
CH-8712 Staefa ZH
Switzerland
Phone: + 41 (0)44 306 40 00
Fax:
+ 41 (0)44 306 40 30
info@sensirion.com
http://www.sensirion.com/
Sales Office Korea:
SENSIRION KOREA Co. Ltd.
#1414, Anyang Construction Tower B/D,
1112-1, Bisan-dong, Anyang-city
Gyeonggi-Province
South Korea
Phone: 031 440 9925~27
Fax:
031 440 9927
info@sensirion.co.kr
http://www.sensirion.co.kr
Find your local representative at: http://www.sensirion.com/reps
Sales Office USA:
SENSIRION Inc.
2801 Townsgate Rd., Suite 240
Westlake Village, CA 91361
USA
Sales Office Japan:
SENSIRION JAPAN Co. Ltd.
Postal Code: 108-0074
Shinagawa Station Bldg. 7F,
4-23-5, Takanawa, Minato-ku
Tokyo, Japan
www.sensirion.com
Version 4.1 – July 2008
Phone: 805 409 4900
Fax: 805 435 0467
michael.karst@sensirion.com
http://www.sensirion.com/
Phone: 03 3444 4940
Fax: 03 3444 4939
info@sensirion.co.jp
http://www.sensirion.co.jp
11/11
Direct download click here
 

[SENSIRION]

Product Summary
SHT7x (including SHT71 and SHT75) is Sensirion’s family of relative humidity and temperature sensors with pins. The sensors integrate sensor elements plus signal processing in compact format and provide a fully calibrated digital output. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. The applied CMOSens® technology guarantees excellent reliability and long term stability. Both sensors are seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit. This results in superior signal quality, a fast response time and insensitivity to external disturbances (EMC).
Each SHT7x is individually calibrated in a precision humidity chamber. The calibration coefficients are programmed into an OTP memory on the chip. These coefficients are used to internally calibrate the signals from the sensors. The 2-wire serial interface and internal voltage regulation allows for easy and fast system integration. The small size and low power consumption makes SHT7x the ultimate choice for even the most demanding applications.
SHT7x is supplied on FR4 with pins which allows for easy integration or replacement. The same sensor is also available surface mountable packaging (SHT1x) or on flex print (SHTA1).

• Fully calibrated
• Digital output
• Low power consumption
• Excellent long term stability
• Pin type package – easy integration

 

Share Link : ETC
@ 2014 - 2018  [ ホーム ] [ 個人情報 保護方針 ] [ リクエストデータシート ]