datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

SCA1000 View Datasheet(PDF) - Murata Manufacturing

Part Name
Description
View to exact match
SCA1000 Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
SCA1000 Series
2 Functional Description
2.1 Measuring Directions
X-axis
Y-axis
VOUT >
VOUT =2.5V
> VOUT
Figure 4. The measuring directions of the SCA1000
2.2 Ratiometric Output
Ratiometric output means that the zero offset point and sensitivity of the sensor are proportional to
the supply voltage. If the SCA1000 supply voltage is fluctuating the SCA1000 output will also vary.
When the same reference voltage for both the SCA1000 sensor and the measuring part (A/D-
converter) is used, the error caused by reference voltage variation is automatically compensated
for.
2.3 SPI Serial Interface
A Serial Peripheral Interface (SPI) system consists of one master device and one or more slave
devices. The master is defined as a micro controller providing the SPI clock and the slave as any
integrated circuit receiving the SPI clock from the master. The ASIC in Murata Electronics’ products
always operates as a slave device in master-slave operation mode.
The SPI has a 4-wire synchronous serial interface. Data communication is enabled by a low active
Slave Select or Chip Select wire (CSB). Data is transmitted by a 3-wire interface consisting of wires
for serial data input (MOSI), serial data output (MISO) and serial clock (SCK).
Murata Electronics Oy
www.muratamems.fi
Subject to changes
Doc. nr. 82 1566 00
7/14
Rev.A
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]