S29GL016A10TAI022 View Datasheet(PDF) - Spansion Inc.

Part Name

Description

View to exact match

S29GL016A10TAI022

64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory featuring 200 nm MirrorBit Process Technology

Spansion Inc. 

Data Sheet

6. Ordering Information

6.1 S29GL016A Standard Products

Standard products are available in several packages and operating ranges. The order number (Valid

Combination) is formed by a combination of the following:

S29GL016A 10 T A I R1 0

Packing Type

0 = Tray

2 = 7-inch Tape and Reel

3 = 13-inch Tape and Reel

Model Number

R1 = x8/x16, VCC=3.0 – 3.6 V, Top boot sector device, top two address sectors protected

when WP#/ACC=VIL

R2 = x8/x16, VCC=3.0 – 3.6 V, Bottom boot sector device, bottom two address sectors

protected when WP#/ACC=VIL

01 = x8/x16, Vcc = 2.7 - 3.6 V, Top boot sector device, top two address sectors protected

when WP#/ACC = VIL

02 = x8/x16, Vcc = 2.7 - 3.6 V, Bottom boot sector device, bottom two address sectors

protected when WP#/ACC = VIL

W1= x16, VCC=2.7 – 3.6 V, 56-ball FBGA, top boot sector device*

W2= x16, VCC=2.7 – 3.6 V, 56-ball FBGA, bottom boot sector device*

*W1 and W2 are MCP-compatible packages for cellular handsets only

Temperature Range

I = Industrial (–40°C to +85°C)

Package Material Set

A = Standard

F = Pb-Free

Package Type

T = Thin Small Outline Package (TSOP) Standard Pinout

B = Fine-pitch Ball-Grid Array Package

F = Fortified Ball-Grid Array Package

Speed Option

See Product Selector Guide on page 9 and Valid Combinations below

Device Number/Description

S29GL016A

3.0 Volt-only, 16 Megabit Page-Mode Flash Memory Manufactured on 200 nm MirrorBit® Process Technology.

Table 6.1 S29GL016A Ordering Options

Device

Number

S29GL016A

S29GL016A Valid Combinations

Speed

Option

Package, Material,

& Temperature Range

Model

Number

TAI, TFI

90, 10

BAI, BFI

R1, R2

FAI, FFI

10

BAI, BFI

W1, W2

TAI, TFI

10

BAI, BFI

01, 02

FAI, FFI

Packing

Type (Note 1)

0, 3

0, 2, 3

0, 3

0, 2, 3

Package Description

(Notes)

TS048 (Note 2)

TSOP

VBK048 (Note 3) Fine-Pitch BGA

LAA064 (Note 3) Fortified BGA

VBU056 (Note 3)

Fine-Pitch BGA

(For cellular handsets only)

TS048 (Note 2)

TSOP

VBK048 (Note 3) Fine-Pitch BGA

LAA064 (Note 3) Fortified BGA

Notes

1. Type 0 is standard. Specify others as required: TSOPs can be packed in Types 0 and 3; BGAs can be packed in Types 0, 2, or 3.

2. TSOP package marking omits packing type designator from ordering part number.

3. BGA package marking omits leading S29 and packing type designator from ordering part number.

Valid Combinations

Valid Combinations list configurations planned to be supported in volume for this device. Consult your local

sales office to confirm availability of specific valid combinations and to check on newly released

combinations.

May 21, 2008 S29GL-A_00_A12

S29GL-A

19

Share Link: