MTV230MS64 View Datasheet(PDF) - Myson Century Inc
Part Name
Description
View to exact match
MTV230MS64 Datasheet PDF : 31 Pages
| |||
MYSON
TECHNOLOGY
MTV230M
(Rev 1.0)
FUNCTIONAL DESCRIPTIONS
1. 8051 CPU Core
The CPU core of MTV230M is compatible with the industry standard 8051, which includes 256 bytes RAM,
Special Function Registers (SFR), two timers, five interrupt sources and serial interface. The CPU core
fetches its program code from the 64K bytes Flash in MTV230M. It uses Port0 and Port2 to access the
“external special function register” (XFR) and external auxiliary RAM (AUXRAM).
The CPU core can run at double rate when FclkE is set. Once the bit is set, the CPU runs as if a 24MHz X’tal
is applied on MTV230M, but the peripherals (IIC, DDC, H/V processor ) still run at the original frequency.
Note: All registers listed in this document reside in 8051’s external RAM area (XFR). For internal RAM
memory map, please refer to 8051 spec.
2. Memory Allocation
2.1 Internal Special Function Registers (SFR)
The SFR is a group of registers that are the same as standard 8051.
2.2 Internal RAM
There are total 256 bytes internal RAM in MTV230M, same as standard 8052.
2.3 External Special Function Registers (XFR)
The XFR is a group of registers allocated in the 8051 external RAM area F00h - FFFh. These registers are
used for OSD control or other special function. Program can use "MOVX" instruction to access these
registers.
2.4 Auxiliary RAM (AUXRAM)
There are total 768 bytes auxiliary RAM allocated in the 8051 external RAM area 800h - AFFh. Program can
use "MOVX" instruction to access the AUXRAM.
FFh Internal RAM
SFR
Accessible by
indirect
addressing only
(Using
MOV A,@Ri
instruction)
80h
7Fh Internal RAM
Accessible by
direct addressing
Accessible by
direct and indirect
addressing
00h
FFFh
XFR
Accessible by
indirect external
RAM addressing
(Using MOVX
instruction)
F00h
AFFh
AUXRAM
Accessible by
indirect external
RAM addressing
(Using MOVX
instruction
800h
Revision 1.0
- 5-
2000/11/15
|
|
Share Link: 