R1113Z461B-TL View Datasheet(PDF) - RICOH Co.,Ltd.

Part Name

Description

View to exact match

R1113Z461B-TL

LOW NOISE 150mA LDO REGULATOR

RICOH Co.,Ltd. 

'2001.8.27

LOW NOISE 150mA LDO REGULATOR

R1113Z SERIES

s OUTLINE

The R1113Z Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current,

low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistors,

a current limit circuit, and a chip enable circuit.

These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient

response of the R1113Z Series are excellent, thus these ICs are very suitable for the power supply for hand-held

communication equipment.

The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is WL-CSP (Wafer Level CSP),

high density mounting of the ICs on boards is possible.

s FEATURES

z Ultra-Low Supply Current......................................... Typ. 100µA

z Standby Mode ........................................................... Typ. 0.1µA

z Low Dropout Voltage ................................................ Typ. 0.23V(IOUT=100mA 3.0V Output type)

z High Ripple Rejection ............................................... Typ. 80dB(f=1kHz 3.0V Output type)

z Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C

z Excellent Line Regulation ......................................... Typ. 0.05%/V

z High Output Voltage Accuracy.................................. ±2.0%

z Excellent Dynamic Response

z Small Package ..........................................................WL-CSP(Wafer Level CSP)

z Output Voltage...........................................................Stepwise setting with a step of 0.1V in the range of 2.0V to 5.0V is

possible

z Built-in Chip Enable Circuit ( 2 types; A: active low , B: active high)

z Built-in Fold Back Protection Circuit........................Typ. 30mA (Current at short mode)

z Ceramic capacitors are recommended to be used with this IC

s APPLICATIONS

z Power source for cellular phones such as GSM, CDMA and various kinds of PCS.

z Power source for electrical appliances such as cameras, VCRs and camcorders.

z Power source for battery-powered equipment.

Rev. 1.11

-1-

Share Link: