TA-1.0 View Datasheet(PDF) - Clare Inc => IXYS
Part Name
Description
View to exact match
TA-1.0 Datasheet PDF : 3 Pages
| |||
HIGH-ENERGY TRIGGERED SPARK GAPS
Triggergaps
SPECIFICATIONS
All characteristics at 25˚C
PARAMETER
Device Specifications
Self-Breakdown Voltage
Applied Voltage
Dimension A
Dimension B
Life Ratings
Peak Current
Discharge Life3
PARAMETER
Device Specifications
Self-Breakdown Voltage
AppliedVoltage
Dimension A
Dimension B
Life Ratings
Peak Current
Discharge Life3
CONDITIONS
TG-221
TG-222
TG-224
SYMBOL MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS
100V/s
EZ
1.0 - 20.0 18.0 - 40.0 1.0 - 20.0 kV
Ebb
0.5 - 18.0 15.0 - 35.0 0.5 - 19.0 kV
-
- 2.25 -
- 3.25 -
- 3.00 - inches
-
- 2.50 -
- 2.50 -
- 4.50 - inches
PW=30µs
1000 shots into 1Ω
-
20 -
- 20 -
- 50 -
-
kA
- 3000 -
- 3000 -
- 6000 -
-
J
CONDITIONS
TG-225
TG-226
SYMBOL MIN TYP MAX MIN TYP MAX UNITS
100V/s
PW=30µs
1000 shots into 1Ω
EZ 18.0 - 40.0 35.0 - 60.0 kV
Ebb 15.0 - 35.0 30.0 - 55.0 kV
-
- 3.50 -
- 4.50 - inches
-
- 4.50 -
- 4.50 - inches
-
50 -
- 50 -
-
kA
- 6000 -
- 6000 -
-
J
1 The trigger voltages given in these tables are the minimum triggering voltages necessary for triggering at the corresponding applied voltage limits. As the applied trigger voltage
increases, the trigger voltage required for triggering decreases. It is assumed that the trigger is applied across the trigger and adjacent main electrodes — higher trigger voltages are
required if it is applied across the trigger voltage and opposite main electrodes.
2 End point for life testing is a 15% reduction in the self-breakdown voltage.
3 Because the self-breakdown voltage of these devices is adjustable, the trigger voltage required for any particular applied voltage cannot be specified. Clare suggests setting the self-
breakdown voltage to at least 115% of the maximum applied voltage.
MECHANICAL DIMENSIONS
ORDERING INFORMATION
TA SERIES
A
25.40 ± 1.59
(1.000 ± 0.063)
12.70 ± 1.59
(0.500 ± 0.063)
TB SERIES
C
B
11.11 MAX.
(0.438)
DIMENSIONS
mm
(inches)
Triggergaps with self-breakdown voltages other than the standard val-
ues listed (in the ranges of 1-15kV for the TA series and 2.5-25kV for the
TB series) are available upon request.
16.67 ± 0.79 DIA.
(0.656 ± 0.031)
A complete part number is represented by the digits below. Self-break-
down voltages are expressed in kV. For example, TA-5.0 is a 5kV TA
series device and TB-25.0 is a 25kV TB series device. The TG-221
to 226 are ordered by the appropriate part number as given in the
specifications.
1.59 DIA. TYP.
(0.063)
4.76 ± 1.59
(0.188 ± 0.063)
TA- X.X
TA- XX.X
TB- X.X
TB- XX.X
for 1.0-9.0kV
for 10.0-15.0kV
for 2.5-9.0kV
for 10.0-25.0kV
Series
TA
TB
Self-breakdown voltage
See specification tables
A DIA.
ADJACENT
TRIGGER
OPPOSITE
560
North America: 1-800-CPCLARE
Europe: 32-11-300868
Asia: 886-2-2523-6368
Japan: 81-3-3980-2212
|
|
Share Link: 