OPB816Z View Datasheet(PDF) - Optek Technology
Part Name
Description
View to exact match
OPB816Z Datasheet PDF : 3 Pages
| |||
Slotted Optical Switch
OPB816Z
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1)
-40°C to +85° C
260° C
Input Diode (see OP140 for additional information)
Forward DC Current
Peak Forward Current (1 µs pulse width, 300 pps)
50 mA
3A
Reverse DC Voltage
Power Dissipation(2)
2V
100 mW
Output Phototransistor (See OP552 for additional information)
Collector-Emitter Voltage
30 V
Emitter-Collector Voltage
5V
Collector DC Current
Power Dissipation(2)
30 mA
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode (see OP140 for additional information)
VF
Forward Voltage
IR
Reverse Current
-
-
1.8
-
- 100
Output Phototransistor (see OP552 for additional information)
V(BR)(CEO) Collector-Emitter Breakdown Voltage
30 -
-
V(BR)(ECO) Emitter-Collector Breakdown Voltage
5
-
-
ICEO Collector-Emitter Leakage Current
-
- 100
Coupled
V IF = 20 mA
µA VR = 2 V
V IC = 1 mA, IF = 0, EE = 0
V IE = 100 µA, IF = 0, EE = 0
nA VCE = 10 V, IF = 0, EE = 0
IC(ON)
VCE(SAT)
On-State Collector Current
Collector-Emitter
1.0 - 10.0 mA VCE = 5 V, IF = 20 mA
-
- 0.4
V IC = 100 µA, IF = 20 mA
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.67 mW/°C above 25° C.
(3) All parameters are tested using pulse techniques.
(4) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(5) Clear dust protection over emitter and sensor apertures.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A .1 12/05
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
|
|
Share Link: 