OP805TXV View Datasheet(PDF) - Optek Technology

Part Name

Description

View to exact match

OP805TXV

(OP803TX - OP805TX) Hi-Reliability NPN Sil icon Phototransistor

Optek Technology 

Product Bulletin OP803TX

September 1996

Hi-Reliability NPN Silicon Phototransistor

Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV

Features

•High reliability screening patterned

after MIL-PRF-19500

•Each lot subjected to Group A & B Lot

Acceptance

•Lensed for high sensitivity

•Mechanically and spectrally matched

to the OP235TX/TXV and

OP236TX/TXV series IREDs

Description

Each device in the OP803, OP804 and

OP805TX/TXV series consists of a high

reliability NPN phototransistor mounted in

a lensed, hermetically sealed, TO-18

package. All devices are 100% screened

per Table II of MIL-PRF-19500. Typical

screening and lot acceptance tests are

provided on page 13-4.

Absolute Maximum Ratings (TA = 25o C unless otherwise noted)

Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C

Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +125o C

Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering

iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1)

Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V

Collector-Base Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V

Emitter-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V

Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V

Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW(2)

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.

(2) Derate linearly 2.5 mW/o C above 25o C.

The OP803, OP804 and OP805 TX/TXV

series lensing creates an acceptance half

angle of 12o<D> measured from the optical

axis to the half power point. The series

can be matched with either a solid state

infrared source, such as the OP235 and

OP236 TX/TXV series IREDs, or can be

used to sense infrared content in a visible

light source, such as a tungsten bulb or

sunlight for automatic brightness control.

Optek Technology, Inc.

1215 W. Crosby Road

Carrollton, Texas 75006

13-34

(972) 323-2200

Fax (972) 323-2396

Share Link: