NBSG16MMNR2G View Datasheet(PDF) - ON Semiconductor

Part Name

Description

View to exact match

NBSG16MMNR2G

2.5 V/3.3 VMultilevel Input to CML Clock/Data Receiver/Driver/Translator Buffer

ON Semiconductor 

NBSG16M

PACKAGE DIMENSIONS

16 PIN QFN

CASE 485G−01

ISSUE C

D

A

ÇÇÇÇ PIN 1

ÇÇ LOCATION

B

E

0.15 C

0.15 C

TOP VIEW

0.10 C

16 X 0.08 C

(A3)

SIDE VIEW

A

SEATING

PLANE

A1

C

16X L

NOTE 5

D2

e

5

8

EXPOSED PAD

0.575

0.022

NOTES:

1. DIMENSIONING AND TOLERANCING PER

ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. DIMENSION b APPLIES TO PLATED

TERMINAL AND IS MEASURED BETWEEN

0.25 AND 0.30 MM FROM TERMINAL.

4. COPLANARITY APPLIES TO THE EXPOSED

PAD AS WELL AS THE TERMINALS.

5. Lmax CONDITION CAN NOT VIOLATE 0.2 MM

MINIMUM SPACING BETWEEN LEAD TIP

AND FLAG

MILLIMETERS

DIM MIN MAX

A 0.80 1.00

A1 0.00 0.05

A3 0.20 REF

b 0.18 0.30

D 3.00 BSC

D2 1.65 1.85

E 3.00 BSC

E2 1.65 1.85

e 0.50 BSC

K 0.18 TYP

L 0.30 0.50

SOLDERING FOOTPRINT*

3.25

0.128

0.30

0.012

EXPOSED PAD

4

16X K

1

9

E2

e

12

3.25

0.128

1.50

0.059

16

13

16X b

0.10 C A B BOTTOM VIEW

0.05 C NOTE 3

0.30

0.50

0.012

ǒ Ǔ 0.02

SCALE 10:1

mm

inches

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and

are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

http://onsemi.com

11

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.

NBSG16M/D

Share Link: