MP2000 – LOW INPUT VOLTAGE, 150mA LINEAR REGULATOR
INITIAL RELEASE SPECIFICATIONS SUBJECT TO CHANGE
Pin # Name Description
Power Source Input. IN supplies the internal power to the MP2000 and is the source of the
pass transistor. Bypass IN to GND with a 2.2µF or greater capacitor.
Enable Input. Drive EN high to turn off the MP2000; low to turn it on. For automatic startup,
connect EN to GND.
Feedback Input. Connect a resistive voltage divider from OUT to FB to set the output
voltage. OUT feedback threshold is 0.5V.
Regulator Output. OUT is the output of the linear regulator. Bypass OUT to GND with a
2.2µF or greater capacitor.
MP2000 Rev. 0.93
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.