MP2000DJ View Datasheet(PDF) - Monolithic Power Systems
Part Name
Description
View to exact match
MP2000DJ Datasheet PDF : 7 Pages
| |||
TM
MP2000 – LOW INPUT VOLTAGE, 150mA LINEAR REGULATOR
INITIAL RELEASE SPECIFICATIONS SUBJECT TO CHANGE
PACKAGE REFERENCE
TOP VIEW
IN 1
5 OUT
GND 2
EN 3
4 FB
MP2000_PD01-TSOT23-5
Part Number**
MP2000DJ-ADJ
MP2000DJ-1.0
Package
TSOT23-5
Temperature
–40°C to +85°C
** For Tape & Reel, add suffix –Z (eg. MP2000DJ–ADJ–Z)
For Lead Free, add suffix –LF (eg. MP2000DJ–ADJ–LF–Z)
ABSOLUTE MAXIMUM RATINGS (1)
IN Supply Voltage....................... –0.3V to +7.0V
FB Voltage.........................–0.3V to VOUT + 0.3V
EN Voltage .......................................... IN – 0.7V
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature .............–65°C to +150°C
Recommended Operating Conditions (2)
Input Voltage ................................ 1.35V to 6.0V
Output Voltage................................... 0.5V to 5V
Load Current........................... 150mA Maximum
Operating Temperature .............–40°C to +85°C
Thermal Resistance (3) θJA θJC
TSOT23-5.............................. 220 .... 110.. °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The device is not guaranteed to function outside of its
operating conditions.
3) Measured on approximately 1” square of 1 oz copper.
ELECTRICAL CHARACTERISTICS
VIN = 1.8V, TA = +25°C, unless otherwise noted.
Parameter
Symbol Condition
Min Typ Max
Ground Pin Current
Shutdown Current
FB Regulation Voltage
Dropout Voltage (4)
Line Regulation
Load Regulation
PSRR (5)
Output Voltage Noise (5)
EN Input Low Voltage
IOUT = 1mA
IOUT = 150mA
EN = 1.0V, VIN = 5V
IOUT = 100mA
IOUT = 150mA
IOUT = 1mA,
VIN = (VOUT + 0.5V) to 6.0V (6)
IOUT = 1mA to 150mA,
VIN = VOUT + 0.5V (6)
VIN > VOUT + 0.5V, C3 = 2.2µF,
VIN(AC) = 100mV, f = 1KHz
f = 1KHz, CFB > 0.1µF, IOUT = 1mA
0.485
65
2.7
7
0.500
250
300
0.01
0.001
50
300
0.7
10
0.515
0.08
0.02
EN Input Bias Current
Thermal Protection (5)
Current Limit Protection (5)
Thermal Protection
Hysteresis (5)
EN = 5V
VOUT = 1.2V
0.01
1
145
200
30
Notes:
4) Dropout Voltage is defined as the input to output differential when the output voltage drops 1% below its normal value.
5) Parameter is guaranteed by design, not production tested.
6) VIN = 1.35V for VOUT = 0.5V to 0.85V
Units
µA
mA
µA
V
mV
%/V
%/mA
dB
nV/√Hz
V
µA
°C
mA
°C
MP2000 Rev. 0.93
www.MonolithicPower.com
2
4/3/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.
|
|
Share Link: 