datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

MC100ELT23DT View Datasheet(PDF) - ON Semiconductor

Part Name
Description
View to exact match
MC100ELT23DT
ON-Semiconductor
ON Semiconductor ON-Semiconductor
MC100ELT23DT Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
MC100ELT23
Table 4. PECL INPUT DC CHARACTERISTICS VCC = 5.0 V; GND = 0.0 V (Note 2)
40°C
25°C
85°C
Symbol
VIH
VIL
VIHCMR
Characteristic
Input HIGH Voltage (SingleEnded) (Note 3)
Input LOW Voltage (SingleEnded)
Input HIGH Voltage Common Mode Range
(Differential) (Note 4)
IIH
Input HIGH Current
IIL
Input LOW Current
Min Typ Max Min Typ Max Min Typ Max Unit
3835
4120 3835
4120 3835
4120 mV
3190
3525 3190
3525 3190
3525 mV
2.2
5.0 2.2
5.0 2.2
5.0 V
255
175
175 mA
0.5
0.5
0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. Input parameters vary 1:1 with VCC. VCC can vary ± 0.25 V.
3. TTL output RL = 500 W to GND.
4. VIHCMR min varies 1:1 with GND, VIHCMR max varies 1:1 with VCC
Table 5. TTL OUTPUT DC CHARACTERISTICS VCC = 4.75 V to 5.25 V; TA = 40°C to 85°C
Symbol
Characteristic
Condition
Min
VOH
VOL
ICCH
ICCL
IOS
Output HIGH Voltage
Output LOW Voltage
Power Supply Current
Power Supply Current
Output Short Circuit Current
IOH = 3.0 mA
IOL = 24 mA
2.4
150
Typ
Max
Unit
(Note 5)
V
0.5
V
23
33
mA
26
36
mA
60
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Max level is VCC 0.7 V by design.
Table 6. AC CHARACTERISTICS VCC= 5.0 V; GND= 0.0 V (Note 6 and Note 7)
40°C
25°C
85°C
Symbol
fmax
tJITTER
tPLH
tPHL
VPP
tr/tf
Characteristic
Maximum Toggle Frequency
Random Clock Jitter (RMS)
Propagation Delay @ 1.5 V
Propagation Delay @ 1.5 V
Input Swing (Note 8)
Output Rise Time (1090%)
Output Fall Time (1090%)
Min Typ Max Min Typ Max Min Typ Max Unit
100
MHz
35
ps
2.0
5.5 2.0
5.5 2.0
5.5 ns
2.0
5.5 2.0
5.5 2.0
5.5 ns
200
1000 200
1000 200
1000 mV
1.6
ns
1.1
ns
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification
limit values are applied individually under normal operating conditions and not valid simultaneously.
6. VCC can vary ± 0.25 V.
7. TTL output RL = 500 W to GND, and CL = 20 pF to GND. Refer to Figure 2.
8. VPP(min) is the minimum input swing for which AC parameters are guaranteed. The device has a DC gain of 40.
http://onsemi.com
3
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]