datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

MC-4516CD641PS-A80 View Datasheet(PDF) - Elpida Memory, Inc

Part Name
Description
View to exact match
MC-4516CD641PS-A80 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC-4516CD641ES,4516CD641PS,4516CD641XS
DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Symbol
Test condition
MIN. MAX. Unit Notes
Operating current
ICC1
Precharge standby current in ICC2P
Epower down mode
ICC2PS
Precharge standby current in ICC2N
non power down mode
ICC2NS
OActive standby current in
ICC3P
power down mode
ICC3PS
L Active standby current in
ICC3N
Burst length = 1, tRC tRC(MIN.)
/CAS latency = 2
/CAS latency = 3
CKE VIL(MAX.), tCK = 15 ns
CKE VIL(MAX.), tCK =
CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
Input signals are changed one time during 30 ns.
CKE VIH(MIN.), tCK = , Input signals are stable.
CKE VIL(MAX.), tCK = 15 ns
CKE VIL(MAX.), tCK =
CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
-A80
-A10
-A80
-A10
560 mA 1
560
560
560
8 mA
8
160 mA
64
40 mA
32
240 mA
non power down mode
Input signals are changed one time during 30 ns.
ICC3NS CKE VIH(MIN.), tCK = , Input signals are stable.
160
Operating current
ICC4 tCK tCK(MIN.), IO = 0 mA
/CAS latency = 2 -A80
700 mA 2
(Burst mode)
-A10
560
/CAS latency = 3 -A80
820
P -A10
680
CBR (Auto) refresh current
ICC5
tRC tRC(MIN.)
/CAS latency = 2 -A80
1,040 mA 3
-A10
1,040
r /CAS latency = 3 -A80
1,040
-A10
1,040
o Self refresh current
ICC6 CKE 0.2 V
16 mA
Input leakage current
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
– 8 +8 µA
Output leakage current
IO(L) DOUT is disabled, VO = 0 to 3.6 V
–3 +3 µA
d High level output voltage
VOH IO = – 4.0 mA
2.4
V
Low level output voltage
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
u addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK(MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK(MIN.).
ct 3. ICC5 is measured on condition that addresses are changed only one time during tCK(MIN.).
6
Data Sheet E0066N10
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]