datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

LS204IN View Datasheet(PDF) - STMicroelectronics

Part Name
Description
View to exact match
LS204IN Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LS204
2
Absolute maximum ratings and operating conditions
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
VCC
Vi
Vid
Rthja
Rthjc
Tj
Tstg
ESD
Parameter
Supply voltage(1)
Input voltage(2)
Differential input voltage(3)
Thermal resistance junction to ambient(4)
SO-8
DIP8
Thermal resistance junction to case(4)
SO-8
DIP8
Output short-circuit duration(5)
Junction temperature
Storage temperature range
HBM: human body model(6)
MM: machine model(7)
CDM: charged device model(8)
Value
±18
±VCC
±(VCC-1)
125
85
Unit
V
V
V
°C/W
40
41
Infinite
150
-65 to +150
2
200
1.5
°C/W
°C
°C
kV
V
kV
1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages
where the zero reference level is the midpoint between VCC+ and VCC-.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.
3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
4. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure
that the dissipation rating is not exceeded.
6. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor
between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.
7. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the
device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations
while the other pins are floating.
8. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly
to the ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
LS204C
LS204I
Unit
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range
Operating free-air temperature range
6 to 30
V
VDD+1.5 to VCC-1.5
V
0 to +70 -40 to +105
°C
3/16
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]