datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

LM3414HVSD View Datasheet(PDF) - National ->Texas Instruments

Part NameDescriptionManufacturer
LM3414HVSD 1A 60W* Common Anode Capable Constant Current Buck LED Driver Requires No External Current Sensing Resistor National-Semiconductor
National ->Texas Instruments National-Semiconductor
LM3414HVSD Datasheet PDF : 20 Pages
First Prev 11 12 13 14 15 16 17 18 19 20
The Pulse-Level-Modulation is a patented method to ensure
accurate average output current regulation without the need
of direct output current sensing. Figure 3 shows the current
waveforms of a typical buck converter under steady state,
where, IL1 is the inductor current and ILX is the main switch
current flowing into the LX pin. For a buck converter operating
in steady state, the mid-point of the RAMP section of the main
switch current is equal to the average level of the inductor
current hence the average output current. In short, by regu-
lating the mid-point of the RAMP section of the main switch
current with respect to a precise reference level, PLM
achieves output current regulation by sensing the main switch
current solely.
The DIM pin of the LM3414/14HV is an input with internal pull-
up that accepts logic signals for average LED current control.
Applying a logic high (above 1.2V) signal to the DIM pin or
leaving the DIM pin open will enable the device. Applying a
logic low signal (below 0.9V) to the DIM pin will disable the
switching activity of the device but maintain VCC regulator
active. The LM3414/14HV allows the inductor current to slew
up to the preset regulated level at full speed instead of charg-
ing the inductor with multiple restrained switching duty cycles.
This enables the LM3414/14HV to achieve high speed dim-
ming and very fine dimming control as shown in Figure 4 and
Figure 5:
FIGURE 4. LED Current Slews up with Multiple Switching Cycle
Direct download click here


Share Link : 

All Rights Reserved © 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]