Register description
Table 103. OUTS2 register description
P_Y
0=Y + no show, 1=Y + show
N_Y
0=Y - no show, 1=Y – show
P_Z
0=Z + no show, 1=Z + show
N_Z
0=Z - no show, 1=Z – show
P_V
0=V + no show, 1=V + show
N_V
0=V - no show, 1=V – show
LIS3DSH
8.57
PEAK2 (1Ah)
Peak detection value register for SM2 operation.
Table 104. PEAK2 default value
0
0
0
0
0
0
0
0
Peak detected value for next condition SM2.
8.58
DES2 (78h)
Decimation counter value register for SM2 operation.
Table 105. DES2 default value
0
0
0
0
0
0
0
0
Registers marked as ‘Reserved’ must not be changed. The writing to those registers may
cause permanent damages to the device.
The content of the registers that are loaded at boot should not be changed. They contain the
factory calibration values. Their content is automatically restored when the device is
powered up.
50/53
Doc ID 022405 Rev 1