datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

KM416L8031BT-GL0 View Datasheet(PDF) - Samsung

Part NameDescriptionManufacturer
KM416L8031BT-GL0 128Mb DDR SDRAM Samsung
Samsung Samsung
KM416L8031BT-GL0 Datasheet PDF : 53 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
128Mb DDR SDRAM
7.2 DDR SDRAM SPEC Items and Test Conditions
Conditions
Operating current - One bank Active-Precharge;
tRC=tRCmin;tCK=100Mhz for DDR200, 133Mhz for DDR266A & DDR266B;
DQ,DM and DQS inputs changing twice per clock cycle;
address and control inputs changing once per clock cycle
Operating current - One bank operation ; One bank open, BL=4, Reads
- Refer to the following page for detailed test condition
Percharge power-down standby current; All banks idle; power - down mode;
CKE = <VIL(max); tCK=100Mhz for DDR200, 133Mhz for DDR266A & DDR266B;
Vin = Vref for DQ,DQS and DM
Precharge Floating standby current; CS# > =VIH(min);All banks idle;
CKE > = VIH(min); tCK=100Mhz for DDR200, 133Mhz for DDR266A & DDR266B;
Address and other control inputs changing once per clock cycle;
Vin = Vref for DQ,DQS and DM
Precharge Quiet standby current; CS# > = VIH(min); All banks idle;
CKE > = VIH(min); tCK = 100Mhz for DDR200, 133Mhz for DDR266A & DDR266B;
Address and other control inputs stable with keeping >= VIH(min) or =<VIL(max);
Vin = Vref for DQ ,DQS and DM
Active power - down standby current ; one bank active; power-down mode;
CKE=< VIL (max); tCK = 100Mhz for DDR200, 133Mhz for DDR266A & DDR266B;
Vin = Vref for DQ,DQS and DM
Active standby current; CS# >= VIH(min); CKE>=VIH(min);
one bank active; active - precharge; tRC=tRASmax; tCK = 100Mhz for DDR200,
133Mhz for DDR266A & DDR266B; DQ, DQS and DM inputs changing twice
per clock cycle; address and other control inputs changing once
per clock cycle
Operating current - burst read; Burst length = 2; reads; continguous burst;
One bank active; address and control inputs changing once per clock cycle;
CL=2 at tCK = 100Mhz for DDR200, CL=2 at tCK = 133Mhz for DDR266A, CL=2.5 at tCK =
133Mhz for DDR266B ; 50% of data changing at every burst; lout = 0 m A
Operating current - burst write; Burst length = 2; writes; continuous burst;
One bank active address and control inputs changing once per clock cycle;
CL=2 at tCK = 100Mhz for DDR200, CL=2 at tCK = 133Mhz for DDR266A,
CL=2.5 at tCK = 133Mhz for DDR266B ; DQ, DM and DQS inputs changing twice
per clock cycle, 50% of input data changing at every burst
Auto refresh current; tRC = tRFC(min) - 8*tCK for DDR200 at 100Mhz,
10*tCK for DDR266A & DDR266B at 133Mhz; distributed refresh
Self refresh current; CKE =< 0.2V; External clock should be on;
tCK = 100Mhz for DDR200, 133Mhz for DDR266A & DDR266B
Orerating current - Four bank operation ; Four bank interleaving with BL=4
-Refer to the following page for detailed test condition
Typical case: VDD = 2.5V, T = 25C’
Worst case : VDD = 2.7V, T = 10C’
Symbol Typical Worst
IDD0
-
-
IDD1
-
-
IDD2P -
-
IDD2F -
-
IDD2Q -
-
IDD3P -
-
IDD3N -
-
IDD4R -
-
IDD4W -
-
IDD5
-
-
IDD6
-
-
IDD7
-
-
- 40 -
REV. 1.0 November. 2. 2000
Direct download click here
 

Share Link : Samsung
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]