datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ISL6565ACVZ View Datasheet(PDF) - Intersil

Part Name
Description
View to exact match
ISL6565ACVZ Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ISL6565A, ISL6565B
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+7V
Input, Output, or I/O Voltage (except OVP) . .GND -0.3V to VCC + 0.3V
OVP Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+15V
ESD (Human body model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>4kV
ESD (Machine model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>300V
ESD (Charged device model) . . . . . . . . . . . . . . . . . . . . . . . . . .>2kV
Operating Conditions
Supply Voltage, VCC (5V bias mode) . . . . . . . . . . . . . . . . +5V ±5%
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 125°C
Thermal Information
Thermal Resistance
θJA (°C/W) θJC (°C/W)
SOIC Package (Note 1) . . . . . . . . . . . .
62
N/A
QFN Package (Notes 2, 3). . . . . . . . . .
33
3.5
TSSOP Package (Note 1) . . . . . . . . . .
85
N/A
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
(SOIC - Lead Tips Only)
CAUTION: Stress above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational section of this specification is not implied.
NOTES:
1. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
2. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
3. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Operating Conditions: VCC = 5V or ICC < 25mA (Note 3), TJ = 0°C to 105°C.
Unless Otherwise Specified.
PARAMETER
TEST CONDITIONS
MIN
VCC SUPPLY CURRENT
Nominal Supply
Shutdown Supply
SHUNT REGULATOR
VCC Voltage
VCC Sink Current
POWER-ON RESET AND ENABLE
POR Threshold
ENABLE Threshold
VCC = 5VDC; EN = 5VDC; RT = 100kΩ,
-
ISEN1 = ISEN2 = ISEN3 = -70µA
VCC = 5VDC; EN = 0VDC; RT = 100k
-
VCC tied to 12VDC thru 300resistor, RT = 100k5.6
VCC tied to 12VDC thru 300resistor, RT = 100k-
VCC Rising
4.2
VCC Falling
3.7
EN Rising
1.29
Hysteresis
-
Fault Reset
1.10
ENLL Input Logic Low Level
-
ENLL input Logic High Level
0.8
ENLL Leakage Current
ENLL = 5V
-
REFERENCE VOLTAGE AND DAC
System Accuracy (VID = 1.2V-1.6V, TJ = 0°C to 85°C)
-0.5
System Accuracy (VID = 0.8375V-1.1875V TJ = 25°C)
-0.7
System Accuracy (VID = 0.8375V-1.1875V, TJ = 0°C to 85°C)
-0.8
VID Pull Up
-65
VID Input Low Level
-
VID Input High Level
0.8
DAC Source/Sink Current
VID = 010100
-200
REF Source/Sink Current
-50
PIN-ADJUSTABLE OFFSET
Voltage at OFS pin
Offset resistor connected to ground
485
Voltage below VCC, offset resistor connected to VCC 1.97
TYP
14
10
5.9
-
4.31
3.82
1.31
150
1.14
-
-
-
-
-
-
-50
-
-
-
-
500
2.03
MAX UNITS
18 mA
14 mA
6.2
V
25 mA
4.50 V
4.00 V
1.33 V
-
mV
1.18 V
0.4
V
-
V
1
µA
0.5 %VID
0.7 %VID
0.8 %VID
-35 µA
0.4
V
-
V
200 µA
50
µA
515 mV
2.09 V
7
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]